Dettagli
This ball caster uses a 1″ diameter plastic ball and has an overall height of 1.1″ (29 mm). The two-part housing snaps together to securely enclose the ball and three rollers that minimize friction between the ball and the ABS housing. The base piece of the housing has holes for three #4 or M3 screws (not included).
This ball caster kit includes a two-part black ABS housing, a 1″ diameter POM (also know as acetal or by the brand name Delrin) plastic ball, and three ABS rollers. When assembled, the ball caster is capable of rolling in any direction with low friction, making it suitable for use as a third contact point for wheeled, differential-drive robots weighing up to around ten pounds.
The base piece of the housing has holes for three #4 or M3 mounting screws (not included) and slots for the three rollers. The second part of the housing snaps into the base piece to secure the ball and rollers. The assembled ball caster has an overall height of 1.1″ (29 mm).
Specifiche
Part. No. : | 2691 |
Questions on 2691 - Pololu Ball Caster with 1″ Plastic Ball
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
270022 Ball Caster with 12,70mm Metal Ball
Il Ball Caster viene utilizzato nei Rover a 2 ruote motrici, per creare il terzo ed eventualmente il quarto punto di appoggiofalse -
270023 Ball Caster da 19,05mm Plastic Ball
Il Ball Caster viene utilizzato nei Rover a 2 ruote motrici, per creare il terzo ed eventualmente il quarto punto di appoggiofalse