582512 298:1 Micro Metal Gearmotor HP

298:1 Micro Metal Gearmotor HP

Micromotoriduttore in metallo rapporto di riduzione 298:1, versione HP (high-power)
Categorie
Prezzi IVA inclusa
€ 15,96 Prezzo
€ 13,08 + VAT

Qty
 

Dettagli

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 298:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.

Key specs at 6 V: 100 RPM and 70 mA free-run, 70 oz-in (5 kg-cm) and 1.6 A stall

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between three different motors: high-power (HP), medium-power (MP), and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). The gearmotor weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram.

Dimensions

Size: 24 x 10 x 12 mm
Weight: 0.34 oz
Shaft diameter: 3 mm

General specifications

Gear ratio: 298:1
Free-run speed @ 6V: 100 rpm
Free-run current @ 6V: 70 mA
Stall current @ 6V: 1600 mA
Stall torque @ 6V: 70 oz·in
Extended motor shaft?: N

Specifiche

Part. No. : 994

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 298:1 Micro Metal Gearmotor HP

Sort by Ascending
  • 05/02/15 02.40 Salve, vorrei sapere se avete delle staffe per poter agganciare questo motoriduttore. Grazie
    • Salve, puo' utilizzare questo prodotto: 270027 Grazie
    • Do you find this question helpful?  Si   No
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    270027 Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    Coppia staffe in plastica per motoriduttori in miniatura Sanyo e simili.
    Tasse escluse:
    € 4,53
    IVA inclusa:
    € 5,53
      Confronta
  2. 1099 - Pololu 10:1 Micro Metal Gearmotor

    341099 1099 - Pololu 10:1 Micro Metal Gearmotor

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 19,00
    IVA inclusa:
    € 23,18
      Confronta
  3. 1093 - Pololu 30:1 Micro Metal Gearmotor HP

    341093 1093 - Pololu 30:1 Micro Metal Gearmotor HP

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 18,00
    IVA inclusa:
    € 21,96
      Confronta
  4. 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343080 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making false
    Tasse escluse:
    € 21,14
    IVA inclusa:
    € 25,79
      Confronta
  5. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Tasse escluse:
    € 21,00
    IVA inclusa:
    € 25,62
      Confronta
  6. 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343074 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has afalse
    Tasse escluse:
    € 22,00
    IVA inclusa:
    € 26,84
      Confronta
  7. 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life
    Tasse escluse:
    € 15,50
    IVA inclusa:
    € 18,91
      Confronta