With the VCP1100, you can quickly and easily measure the current flow in an electronic circuit or device. Just put this current sensor in series with one of the power lines, and you'll be able to measure up to 30A of direct current. It connects to a port on a VINT Hub; you can find a list of hubs on the "Compatible Products" tab.
Isolated for Stability
This Phidget is electrically isolated, so a power surge on the circuit you're measuring will not damage your VINT Hub or your computer. Isolation also improves stability by eliminiating potential ground loops.
|Sensor Type||Current (DC In-Line Hall Effect)|
|Input Current Min||-30 A|
|Input Current Max||30 A|
|Current Measurement Resolution||1.1 mA|
|Surge Current (Input)||100 A|
|Measurement Error Max||4 %|
|Input Current Noise||20 mA|
|Recommended Wire Size||10 - 26 AWG|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
|Current Consumption Max||1.8 mA|
|Current Consumption Min||20 μA|
|Isolation Voltage (DC)||50 V DC|
|Input Impedance||1.2 mΩ|
|Part. No. :||VCP1100|
|VINT Type :||Tensione/Corrente|
Questions on 30A Current Sensor Phidget
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).