The Pololu Zumo 32U4 robot is a versatile tracked robot based on the Arduino-compatible ATmega32U4 MCU, and this kit contains most of the parts you need to build one—all you need to add are a pair of micro metal gearmotors and four AA batteries. It includes integrated dual motor drivers, an LCD, quadrature encoders, line sensors, side and front proximity sensors, and a full IMU. The assembled robot is less than 10 cm × 10 cm—small enough to qualify for Mini Sumo. This product is a kit; assembly (including soldering) is required.
Note: This product is a kit; assembly (including soldering) is required. Motors and batteries are sold separately. A USB A to Micro-B cable (not included) is required for programming.
New sprockets! As of April 10, 2015, we are transitioning to new black, spoked sprockets in place of the original white ones. If you ordered a Zumo 32U4 kit before this change and want the newer sprockets, please contact us with your original order number.
The Zumo 32U4 is a highly integrated, user-programmable and customizable robot. When assembled, the low-profile tracked robot measures less than 10 cm on each side and weighs approximately 275 g with batteries (170 g without), so it is both small enough and light enough to qualify for Mini-Sumo competitions, but its versatility makes it capable of much more than just robot sumo battles.
At the heart of the Zumo 32U4 is an Atmel ATmega32U4 AVR microcontroller, and like our A-Star 32U4 programmable controllers, the Zumo 32U4 features a USB interface and ships preloaded with an Arduino-compatible bootloader. A software add-on is available that makes it easy to program the robot from the Arduino environment, and we have Arduino libraries and example sketches to help get you started. For advanced users who want to customize or enhance their robots with additional peripherals, the robot’s power rails and microcontroller’s I/O lines can be accessed via 0.1″-spaced through-holes along the sides and front of the main board.
The Zumo 32U4 features two H-bridge motor drivers and a variety of integrated sensors, including a pair of quadrature encoders for closed-loop motor control, a complete inertial measurement unit (3-axis accelerometer, gyro, and magnetometer), five downward-facing reflectance sensors for line-following or edge-detection, and front- and side-facing proximity sensors for obstacle detection and ranging. Three on-board pushbuttons offer a convenient interface for user input, and an LCD, buzzer, and indicator LEDs allow the robot to provide feedback.
With the exception of motors, batteries, and a USB A to Micro-B cable, this kit contains everything necessary to build and operate a Zumo 32U4 robot:
- Zumo chassis kit
- Zumo 32U4 main board
- Zumo 32U4 front sensor array
- stainless steel Zumo 32U4 blade
- 8×2 character LCD
- two magnetic encoder discs (the encoder sensors are integrated into the main board)
- IR LEDs (proximity sensor emitters; the detectors are integrated into the front sensor array)
- through-hole buzzer
- assorted hardware and connectors
See the Zumo 32U4 robot user’s guide for detailed assembly instructions.
The Zumo chassis uses two micro metal gearmotors, one for each tread. The ideal motors for your robot depend on your desired torque, speed, and current draw, so with the chassis. We generally recommend using HP versions of our micro metal gearmotors since the tracks require a decent amount of torque to move effectively; higher gear ratios of the non-HP motors might work if you want lower current draw, but they will be slower and offer less control. Specifically, we recommend the 50:1, 75:1, or 100:1 HP motors for use with this chassis. Additionally, be sure to get a version with extended motor shafts if you want to be able to use the Zumo 32U4’s encoders. The following table summarizes the key specifications of these three gearmotors. The first four columns are specifications of the motors themselves, while the last column is the measured top speed of a Zumo chassis loaded to a weight of 500 g and driven with these motors. Note that the specifications are for 6V operation, which is approximately the voltage you would get with four alkaline batteries; four NiMH AA cells will typically provide less than 5V.
The Zumo 32U4 robot runs off of four AA batteries. It works with both alkaline and NiMH batteries, though we recommend using rechargeable AA NiMH cells.
|Part. No. :||3124|
Questions on 3124 - Zumo 32U4 Robot Kit (No Motors)
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
Tasse escluse:€ 35,48IVA inclusa:€ 43,29
Tasse escluse:€ 75,40IVA inclusa:€ 91,99
Tasse escluse:€ 123,85IVA inclusa:€ 151,10