193321 3321 - 28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox

3321 - 28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox

This compact bipolar stepper with a rear shaft and a planetary gearbox has a 0.067° step angle and 14 kg·cm of torque at low speeds.
Categorie
Prezzi IVA inclusa
€ 56,01 Prezzo
€ 45,91 + VAT

 

Dettagli

This NEMA-11 motor has an integrated Planetary gearbox with a 26103/121 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3321 has a maximum speed of 120 RPM. At the output of the gearbox, the step angle approximately 0.067°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.

The 3321 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

 

Wire Color Black Green Red Blue
Board Connector A B C D

Note: Make sure to unplug the power cord from the motor controller before switching wires around.


The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 28STH32-0674B / 28JXS40K27
Step Angle 0.067°
Step Accuracy ± 5 %
Holding Torque 16.1 kg·cm
Rated Torque 14 kg·cm
Maximum Speed (w/1067 Motor Controller) 120 RPM
Acceleration at Max Speed 
(w/1067 Motor Controller)
1.8E+06 1/16 steps/sec²

 

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 670 mA
Coil Resistance 5.6 Ω

 

Physical Properties

Shaft Diameter 6 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 11
Weight 217.5 g
Number of Leads 4
Wire Length 300 mm

 

Gearbox Properties

Gearbox Type Planetary
Gear Ratio 26 103121 : 1
Backlash Error 12°
Maximum Strength of Gears 20 kg·cm
Shaft Maximum Axial Load 25 N
Shaft Maximum Radial Load 35 N

Warning


Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

 

Resources


Specifiche

Part. No. : 3321
NEMA : 17
WINDING : Bipolar
Diam. Asse mm : 8

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 3321 - 28STH32 NEMA-11 Bipolar Stepper with 27:1 Gearbox

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 3531 - Optical Rotary Encoder HKT22

    193531 3531 - Optical Rotary Encoder HKT22

    This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even whefalse
    Tasse escluse:
    € 31,02
    IVA inclusa:
    € 37,84
      Confronta
  2. 3320 - 28STH32 NEMA-11 Bipolar Gearless Stepper Motor

    193320 3320 - 28STH32 NEMA-11 Bipolar Gearless Stepper Motor

    This tiny stepper with a rear shaft has a 1.8° step angle and 520 g·cm of torque at low speeds.
    Tasse escluse:
    € 20,43
    IVA inclusa:
    € 24,92
      Confronta
  3. 3337 - Stepper Mounting Bracket (NEMA 11)

    193337 3337 - Stepper Mounting Bracket (NEMA 11)

    Fix a NEMA-11 sized motor or 28mm gearbox to a flat surface with this steel mounting bracket
    Tasse escluse:
    € 4,08
    IVA inclusa:
    € 4,98
      Confronta
  4. Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    120349 Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

    This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has false
    Tasse escluse:
    € 37,20
    IVA inclusa:
    € 45,38
      Confronta
  5.  1067 - PhidgetStepper Bipolar HC - Controllo motori passo passo

    201067 1067 - PhidgetStepper Bipolar HC - Controllo motori passo passo

    Controllo motori passo passo (stepper), controlla la posizione, la velocita', l'accelerazione di un motore stepper bipolare. false
    Tasse escluse:
    € 100,00
    IVA inclusa:
    € 122,00
      Confronta
  6. STC1002 - 8A Stepper Phidget

    201102 STC1002 - 8A Stepper Phidget

    Controllo motori passo passo (stepper), controlla la posizione, la velocita', l'accelerazione di un motore stepper bipolare dfalse
    Tasse escluse:
    € 85,00
    IVA inclusa:
    € 103,70
      Confronta
  7. SAF2000 - Power Guard Phidget

    202000 SAF2000 - Power Guard Phidget

    Protezione per alimentatori ed elettroniche da interferenze e picchi generati da motori
    Tasse escluse:
    € 10,50
    IVA inclusa:
    € 12,81
      Confronta