This gearmotor is a compact (1.50" x 0.59" x 0.47") brushed DC motor with 35:1 metal gearbox. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.
Key specs at 6 V: 350 RPM and 70 mA free-run, 20 oz-in (1.4 kg-cm) and 1.5 A stall.
These motors are intended for use at 9 V, which means you can get more speed and torque out of this motor than is listed in the 6 V specs. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 12 V range (the motor can begin rotating at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.
At 6 V, this gearmotor will have a no-load RPM of around 350 with a free-run current of 70 mA, a stall current of 1.5 A, and a stall torque of around 14 oz-in (1 kg-cm).
|Size:||38 x 12 x 15 mm|
|Shaft diameter:||3 mm|
|Free-run speed @ 6V:||350 rpm|
|Free-run current @ 6V:||70 mA|
|Stall current @ 6V:||1500 mA|
|Stall torque @ 6V:||20 oz·in|
|Part. No. :||1091|
Questions on 35:1 Mini Metal Gearmotor
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).