344760 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB
Categorie
Prezzi IVA inclusa
€ 8,91 Prezzo
€ 7,30 + VAT

 

Dettagli

Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. These encoders have a top-entry, 6-pin male JST SH-type connector, and we have cables that work with them available in several lengths (12 cm30 cm, and 75 cm). This module is compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions.

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not included with this kit). The encoder board senses the rotation of the magnetic disc and provides a resolution of 12 counts per revolution of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output shaft, multiply the gear ratio by 12. This compact encoder solution fits within the 12 mm × 10 mm cross section of the motors on three of the four sides, and it extends 2.8 mm past the edge of the fourth side.

Dimensions

Size: 12.8 mm × 11.6 mm1
Weight: 1.5 g2

General specifications

Minimum operating voltage: 2.7 V
Maximum operating voltage: 18 V
Connector: top-entry, 6-pin male, JST SH-type

Identifying markings

PCB dev codes: enc03c
Other PCB markings: 0J12460

Notes:

1 The assembled encoder will extend approximately 5 mm beyond the plastic motor end cap.
2 Weight of full set. Each encoder board weighs ~0.4 g and each magnet disc weighs ~0.3 g.

Product Page -->

Specifiche

Part. No. : 4760

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Tasse escluse:
    € 14,92
    IVA inclusa:
    € 18,20
      Confronta
  2. 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse
    Tasse escluse:
    € 13,99
    IVA inclusa:
    € 17,07
      Confronta
  3. 2369 - 210:1 Micro Metal Gearmotor MP 6V

    342369 2369 - 210:1 Micro Metal Gearmotor MP 6V

    Micro motoriduttore di media potenza, 6V a spazzole, con un rapporto di 210.59:1 e ingranaggi in metallo. Asse da 3mm a D
    Tasse escluse:
    € 11,81
    IVA inclusa:
    € 14,41
      Confronta
  4. 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life
    Tasse escluse:
    € 14,90
    IVA inclusa:
    € 18,18
      Confronta
  5. 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    344761 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB. Versione con connettore orizzontale
    Tasse escluse:
    € 7,30
    IVA inclusa:
    € 8,91
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!