If the 3.3V digital output mode of your hub's VINT port is not powerful enough, or if you just need more digital outputs, this cost-effective output module has you covered. This board adds four 5V digital outputs to your VINT hub, allowing you to control LEDs, relays, and other logic-level electronics.
Each digital output is capable of pulse-width modulation, allowing you to select a duty cycle between 0% and 100% power. This is particularly useful for dimmable electronics such as LEDs or fans. Wiring is simple since each output terminal has a ground terminal beside it, leading to the board's shared ground.
|Number of Digital Outputs||4|
|Series Resistance||127 Ω|
|Digital Output Voltage Min||0 V DC|
|Digital Output Voltage Max||5 V DC|
|Digital Output Current Max||16 mA|
|PWM Frequency||16 kHz|
|PWM Resolution||0.1 %|
|Current Consumption Min||23 μA|
|Current Consumption Max||150 mA|
|Recommended Wire Size||16 - 26 AWG|
|Operating Temperature Max||85 °C|
|Operating Temperature Min||-40 °C|
|Part. No. :||OUT1100|
|VINT Type :||Schede I/O|
Questions on 4x Digital Output Phidget
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).