809080 Adafruit ATSAMD09 Breakout with seesaw

Adafruit ATSAMD09 Breakout with seesaw

Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities.
Categorie
Prezzi IVA inclusa
€ 6,67 Prezzo
€ 5,47 + VAT

Qty
 

Dettagli

Adafruit seesaw is a near-universal converter framework which allows you to add add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities.

For example, our ATSAMD09 breakout with seesaw gives you

  • 3 x 12-bit ADC inputs
  • 3 x 8-bit PWM outputs
  • 7 x GPIO with selectable pullup or pulldown
  • 1 x NeoPixel output (up to 340 pixels)
  • 1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
  • 1 x Interrupt output that can be triggered by any of the accessories
  • 2 x I2C address selection pins
  • 1 x Activity LED

But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware.

The ATSAMD09 breakout is great for development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips.

Please note: The boards do not come with a bootloader. If you want to do development on seesaw (e.g. changing the configuration) you'll need to pick up a J-Link and we recommend a SWD adapter breakout. At this time our project is for Atmel Studio but you could probably get it working with arm gcc and a Makefile. We don't provide any support for custom builds of seesaw - we think this is cool and useful for the Maker community!

For more details including the documentation on how to use seesaw, libraries for Arduino/CircuitPython/Raspberry Pi Python, schematics, and more check out the Adafruit seesaw guide

  • Uses I2C address 0x49 - can be changed to 0x4A, 0x4B or 0x4C

Product Dimensions: 32.0mm x 12.0mm x 3.5mm / 1.3" x 0.5" x 0.1"

Product Weight: 1.6g / 0.1oz

Specifiche

Part. No. : 3657

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit ATSAMD09 Breakout with seesaw

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. ULN2003A - Array di 7 Transistor Darlington

    400010 ULN2003A - Array di 7 Transistor Darlington

    Questo integrato comprende un array di 7 transistor Darlington, utile per gestire elevati carichi induttivi, ottimo per motorfalse
    Tasse escluse:
    € 1,25
    IVA inclusa:
    € 1,53
      Confronta
  2. ULN2803A - Array di 8 Transistor Darlington

    400011 ULN2803A - Array di 8 Transistor Darlington

    Questo integrato comprende un array di 8 transistor Darlington, utile per gestire elevati carichi induttivi, ottimo per motorfalse
    Tasse escluse:
    € 1,33
    IVA inclusa:
    € 1,63
      Confronta
  3. PCF8574P I/O Expander

    400015 PCF8574P I/O Expander

    Questo chip, fornisce una porta parallela, ovvero 8 porte I/O, gestibili tramite protocollo I?C bus.
    Tasse escluse:
    € 2,67
    IVA inclusa:
    € 3,25
      Confronta