808917 Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix

Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix

This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" square
Prezzi IVA inclusa
€ 34,16 Prezzo
€ 28,00 + VAT

 

Dettagli

Do not eat this LED grid just because it is so colorful and bite-sized! This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" square (thats 25.4mm x 25.4mm for you metric-lovers). Best of all, these are little DotStar LEDs, with built in PWM drivers, so you only need two digital I/O pins to get a-glowin'.

But do not be fooled by their small size, each LED is still incredibly, blindingly bright just like the DotStars/NeoPixels you know and love. These are the same integrated LEDs that are used in our new fancy DotStar strips just really small.

Arranged in an 8x8 matrix, each pixel is individually addressable: like NeoPixels, DotStar LEDs have an embedded microcontroller inside the LED. You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Each LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin. By sending a long string of data, you can control an 'infinite' number of LEDs. The PWM is built into each LED-chip so once you set the color you can stop talking to the disk and it will continue to PWM all the LEDs for you.

Wiring it up is easy: there are two 4-pad connection ports on the back. Solder wires to the input port (+5V GND ClockIn and DataIn) and provide 5VDC to the +5V and ground pins, then connect the CIN/DIN pin to your microcontroller. If you have hardware SPI, use the SCK and MOSI pins respectively. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 40mA (thats up to 2.5 Amps per panel if all LEDs are on bright white!) we suggest our 5V 2A power supply if you're going to use full brightness and a lot of white. For most uses, you'll see about 0.5A of current per panel, and you can set the brightness to drop that down. Note that so much current through a small board can make it toasty!

To keep the board small, we did not put any small surface-mount capacitors on the front. Instead, there's a power/ground pad set on the back and a 220uF capacitor that you can solder onto the back for a compact fit. There's also four mounting holes that you can use for attachment, or snap them off with pliers if you want a perfect 1" square.

Check out our tutorial showing wiring, power usage calculations, example code for usage, etc!

Product Dimensions: 36.0mm x 25.5mm x 2.6mm / 1.4" x 1.0" x 0.1"

Product Weight: 3.0g / 0.1oz

 

Specifiche

Part. No. : 3444

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

    511487 Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

    Pannello con 64 LED RGB in una matrice 8x8. Si pilota con un solo pin del microcontrollore ed ogni LED e' pilotabile singolarfalse
    Tasse escluse:
    € 38,60
    IVA inclusa:
    € 47,09
      Confronta
  2. Small 1.2" 8x8 Ultra Bright Square White LED Matrix + Backpack

    807805 Small 1.2" 8x8 Ultra Bright Square White LED Matrix + Backpack

    Display a matrice 8x8, con interfaccia I2C, disponibili molti esempi e librerie per Arduino.
    Tasse escluse:
    € 12,71
    IVA inclusa:
    € 15,51
      Confronta
  3. Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red

    808716 Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red

    This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. Itfalse
    Tasse escluse:
    € 9,44
    IVA inclusa:
    € 11,52
      Confronta
  4. Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White

    808719 Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White

    This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. Itfalse
    Tasse escluse:
    € 14,50
    IVA inclusa:
    € 17,69
      Confronta
  5. LilyPad LED Yellow (5pcs)

    714014 LilyPad LED Yellow (5pcs)

    This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at false
    Tasse escluse:
    € 4,33
    IVA inclusa:
    € 5,28
      Confronta
  6. LilyPad RGB LED

    713735 LilyPad RGB LED

    LED RGB della linea di wearables LilyPad, e' possibile visualizzare qualsiasi colore.
    Tasse escluse:
    € 4,33
    IVA inclusa:
    € 5,28
      Confronta