808966 Adafruit Feather M0 Express - Designed for CircuitPython - ATSAMD21 Cortex M0

Adafruit Feather M0 Express - Designed for CircuitPython - ATSAMD21 Cortex M0

We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython!
Prezzi IVA inclusa
€ 23,42 Prezzo
€ 19,20 + VAT

Qty
 

Dettagli

We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython! CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics.

Please note, CircuitPython is still in beta and we're working hard to make it awesome! Please pick up one of these Feather M0 Expresses if you want to try it out - maybe even help us find bugs and make improvements!

That doesn't mean you cant also use it with Arduino IDE! At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0+ processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.

Here's some handy specs!

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5 grams
  • ATSAMD21G18 @ 48MHz with 3.3V logic/power
  • 256KB of FLASH + 32KB of RAM
  • No EEPROM
  • 32.768 KHz crystal for clock generation & RTC
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • PWM outputs on all pins
  • 6 x 12-bit analog inputs
  • 1 x 10-bit analog ouput (DAC)
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button

The Feather M0 Express uses the extra space left over to add a Mini NeoPixel2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB.

Comes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE or for loading CircuitPython. We also toss in some header so you can solder it in and plug into a solderless breadboard. 

Lipoly battery and USB cable not included (but we do have lots of options in the shop if you'd like!)

Wanna get started with this fancy new Feather? We have a full guide with details on using it with both Arduino IDE and CircuitPython. The guide also has wiring information, drivers, Fritzing objects, schematics, datasheets and more!

Product Dimensions: 51.0mm x 22.8mm x 7.3mm / 2.0" x 0.9" x 0.3"

Product Weight: 4.7g / 0.2oz

 

Specifiche

Part. No. : 3403

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit Feather M0 Express - Designed for CircuitPython - ATSAMD21 Cortex M0

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

    808528 Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

    At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used ifalse
    Tasse escluse:
    € 19,24
    IVA inclusa:
    € 23,47
      Confronta
  2. FeatherWing Proto - Prototyping Add-on For All Feather Boards

    808529 FeatherWing Proto - Prototyping Add-on For All Feather Boards

    This is the FeatherWing Proto - a prototyping add-on for all Feather boards.
    Tasse escluse:
    € 5,31
    IVA inclusa:
    € 6,48
      Confronta
  3. Adafruit Feather 32u4 Adalogger

    808553 Adafruit Feather 32u4 Adalogger

    This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and bfalse
    Tasse escluse:
    € 21,15
    IVA inclusa:
    € 25,80
      Confronta
  4. Feather Stacking Headers - 12-pin and 16-pin female headers

    808554 Feather Stacking Headers - 12-pin and 16-pin female headers

    These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!
    Tasse escluse:
    € 1,35
    IVA inclusa:
    € 1,65
      Confronta
  5. OLED Breakout Board - 16-bit Color 1.5" w/microSD holder

    808884 OLED Breakout Board - 16-bit Color 1.5" w/microSD holder

    This OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPfalse
    Tasse escluse:
    € 38,36
    IVA inclusa:
    € 46,80
      Confronta
  6. Adafruit METRO M0 Express - designed for CircuitPython - ATSAMD21G18

    808998 Adafruit METRO M0 Express - designed for CircuitPython - ATSAMD21G18

    At the Metro M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in false
    Tasse escluse:
    € 24,10
    IVA inclusa:
    € 29,40
      Confronta
  7. Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

    809078 Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

    The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Afalse
    Tasse escluse:
    € 10,00
    IVA inclusa:
    € 12,20
      Confronta
  8. Adafruit AMG8833 IR Thermal Camera FeatherWing

    809083 Adafruit AMG8833 IR Thermal Camera FeatherWing

    This is the Thermal Camera FeatherWing: thanks to the Panasonic AMG8833 8x8 GridEYE sensor, it adds heat-vision to any Feathefalse
    Tasse escluse:
    € 44,10
    IVA inclusa:
    € 53,80
      Confronta
  9. Adafruit DotStar FeatherWing - 6 x 12 RGB LEDs

    809084 Adafruit DotStar FeatherWing - 6 x 12 RGB LEDs

    This is the DotStar FeatherWing, a 6x12 RGB LED Add-on For All Feather Boards!
    Tasse escluse:
    € 33,00
    IVA inclusa:
    € 40,26
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!