Dettagli
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard header. Simply insert the end of the cable into the connector and press it closed. The teeth inside the connector will “clinch” around the conductors and break them out to two female 0.1" spaced pin headers!
Though the Clincher connector can be used with FFCs, we also like to use them with our FlexiForce sensors and other flex/force sensors found in the Recommended Products section below.
Note: Please be aware that we will not be able to accept returns on this connector if it has been closed. Sorry for any inconvenience this may cause.
Documents:
Specifiche
Part. No. : | COM-14194 |
Questions on Amphenol FCI Clincher Connector (2 Position, Female)
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
708606 Flex Sensor 114,3 mm
A simple flex sensor 114,3mm in length. As the sensor is flexed, the resistance across the sensor increases. -
193100 3100 - 8'' FlexiForce 0-1lb. Resistive Force Sensor
Il sensore FlexiForce e' un circuito ultrasottile e flessibile che puo' essere integrato in molte applicazioni. Esso puo' misfalse -
710264 Flex Sensor 2.2"
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technfalse -
711207 Sensore di pressione piezoresistivo (11Kg)
Sensore di pressione piezoresistivo. Più forte si preme sull'area sensibile, più il valore di resistenza diminuisce. -
708685 Flexiforce Pressure Sensor - 100lbs.
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, tfalse