808582 DC Motor + Stepper FeatherWing Add-on For All Feather Boards

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors).
Categorie
Prezzi IVA inclusa
€ 22,78 Prezzo
€ 18,67 + VAT

Qty
 

Dettagli

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!

The original Adafruit Motorshield Kit is one of our most beloved kits, which is why we decided to squish it all together on a FeatherWing to make something even smaller, lighter, and more portable! Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C.

Since the FeatherWing only uses the I2C (SDA & SCL pins), it works with any and all Feathers- ATmega32u4, ATSAM M0 or ESP8266-based. You can stack it with any other FeatherWing or with itself (just make sure you have each wing with a unique I2C address) 

Motor FeatherWing Specs:

  • 4 full H-Bridges: the TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 12-bit speed selection (so, about 0.02% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Motors automatically disabled on power-up
  • Big 3.5mm terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • Completely stackable design: 5 address-select jumper pads means up to 32 stackable wings: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.
  • Download the easy-to-use Arduino software library, check out the examples and you're ready to go!

Comes with an assembled & tested FeatherWing, terminal blocks & plain header. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time.Feather and motors are not included but we have lots of motors in the shop. You can use any DC or stepper motors that run from 4.5-13.5VDC and draw under 1.2A (3A peak) per coil. You'll likely also need to provide some external power supply for your motors, since its not suggested you run motors from the Feather's lipoly battery.

We have a great tutorial in the Adafruit Learning System for the bigger but similar Motor Shield with a lot of documentation and example code, so please check it out - Please note that unlike the full sized shield, there's no servo connections (they wouldnt fit!) So if you need a bunch of servos, check out our 8-channel Servo Featherwing

Specifiche

Part. No. : 2927

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on DC Motor + Stepper FeatherWing Add-on For All Feather Boards

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit Feather 32u4 Bluefruit LE

    808524 Adafruit Feather 32u4 Bluefruit LE

    This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with builfalse
    Tasse escluse:
    € 31,84
    IVA inclusa:
    € 38,84
      Confronta
  2. FeatherWing Proto - Prototyping Add-on For All Feather Boards

    808529 FeatherWing Proto - Prototyping Add-on For All Feather Boards

    This is the FeatherWing Proto - a prototyping add-on for all Feather boards.
    Tasse escluse:
    € 5,47
    IVA inclusa:
    € 6,67
      Confronta
  3. Adafruit Feather 32u4 Adalogger

    808553 Adafruit Feather 32u4 Adalogger

    This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and bfalse
    Tasse escluse:
    € 20,52
    IVA inclusa:
    € 25,03
      Confronta
  4. Feather Stacking Headers - 12-pin and 16-pin female headers

    808554 Feather Stacking Headers - 12-pin and 16-pin female headers

    These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!
    Tasse escluse:
    € 1,79
    IVA inclusa:
    € 2,18
      Confronta
  5. 8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards

    808581 8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards

    This is the 8-Channel PWM or Servo​ FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing.
    Tasse escluse:
    € 9,44
    IVA inclusa:
    € 11,52
      Confronta