808647 Prop Shield With Motion Sensors

Prop Shield With Motion Sensors

This shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for images, sound clips, or data logging. It's approximately the size of a Teensy, just slightly longer to allow space for mounting holes and connections for power, speaker, and LEDs.
Categorie
Prezzi IVA inclusa
€ 24,90 Prezzo
€ 20,41 + VAT

 

Dettagli

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes.

  • Motion Sensors - Allows motion interactive light & sound.
  • Audio Amplifier - Clear quality audio output to a small speaker.
  • Fast LED Driver - Drive APA102 / Dotstar LEDs for colorful lighting with rapid response.
  • Flash Memory - 8 Mbyte storage for images, sound clips, and data logging.

This shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for images, sound clips, or data logging. It's approximately the size of a Teensy, just slightly longer to allow space for mounting holes and connections for power, speaker, and LEDs.

Motion Sensors

The motion sensors are accessed with the NXPMotionSense library.

To begin, upload File > Examples > NXPMotionSense > CalibrateSensors. Then open the Arduino Serial Monitor. You should see raw data printing rapidly.

Close the serial monitor, and then run the Motion Sensor Calibration Tool.

 

Use the Port menu to select the serial port. Arduino's serial monitor must be closed.

Rotate the Prop Shield to collect calibration data. As better data is collected from many angles, the 4 error numbers will decrease and the red dots will form a sphere which rotates perfectly centered. Use File > Send Calibration to write the calibration data to Teensy's EEPROM memory.

After calibration data is written, you can run either of these examples to use the calibrated data. MahonyIMU requires much less processing power, so it's recommended for Teensy LC and regular 8 bit Arduino boards.

File > Examples > NXPMotionSense > Orientation - Use on Teensy 3.2 
File > Examples > NXPMotionSense > MahonyIMU - Use on Teensy LC or Arduino

When either of these is running, the Arduino Serial Monitor will show you computed Heading, Pitch and Roll. As you turn the board in each direction (imagine it's an airplane), you should see each angle change.

To see the orientation data in graphical form, use Processing to run the Orientation Visualizer. You many need to edit this code with your serial port name. Of course, close the Arduino Serial Monitor window, so the Processing sketch can access the data.

Datasheets

 

  • FXOS8700CQ - 6-Axis Sensor, Linear Accelerometer & Magnetometer
  • FXAS21002C - 3-Axis Digital Angular Rate Gyroscope
  • MPL3115A2 - Precision Pressure/Altitude & Temperature
  • LM48310 - 2.6W Mono Class D Audio Power Amplifier
  • W25Q64FV - 64 Mbit (8 Mbyte) Serial Flash Memory
  • SN74AHCT1G08 - Single 2-Input AND Gate

 

Specifiche

Part. No. : PROP_SHIELD

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Prop Shield With Motion Sensors

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Teensy LC

    808421 Teensy LC

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 bringfalse
    Tasse escluse:
    € 12,30
    IVA inclusa:
    € 15,01
      Confronta
  2. Teensy 3.2

    808443 Teensy 3.2

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse
    Tasse escluse:
    € 20,66
    IVA inclusa:
    € 25,21
      Confronta
  3. Teensy 3.2 - with Header Pins

    808645 Teensy 3.2 - with Header Pins

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse
    Tasse escluse:
    € 24,75
    IVA inclusa:
    € 30,20
      Confronta
  4. Teensy LC - with Header Pins

    808646 Teensy LC - with Header Pins

    Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cofalse
    Tasse escluse:
    € 20,00
    IVA inclusa:
    € 24,40
      Confronta
  5. Prop Shield, Low Cost (no Motion Sensors)

    808648 Prop Shield, Low Cost (no Motion Sensors)

    This shield features a 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for imagefalse
    Tasse escluse:
    € 8,90
    IVA inclusa:
    € 10,86
      Confronta
  6. WIZ820io & Micro SD Card Adaptor

    808744 WIZ820io & Micro SD Card Adaptor

    This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy false
    Tasse escluse:
    € 6,90
    IVA inclusa:
    € 8,42
      Confronta
  7. Teensy 4.1

    809434 Teensy 4.1

    Il Teensy 4.1 equipaggiato con processore ARM Cortex-M7 a 600MHz e' il microcontrollore piu' veloce disponibile oggi sul mercato.
    Tasse escluse:
    € 28,30
    IVA inclusa:
    € 34,53
      Confronta