714063 LilyPad LilyMini ProtoSnap

LilyPad LilyMini ProtoSnap

At the center of the board is a pre-programmed LilyMini microcontroller connected to a LilyPad Light Sensor, LilyPad Button and two pairs of LilyPad LEDs.
Categorie
Prezzi IVA inclusa
€ 14,04 Prezzo
€ 11,51 + VAT

Qty
 

Dettagli

The LilyMini ProtoSnap is a great way to get started learning about creating interactive e-textile circuits before you start sewing. Like other LilyPad ProtoSnap boards, the LilyMini ProtoSnap has all of its pieces wired together out of the box, enabling you to test the circuit’s function before you sew. At the center of the board is a pre-programmed LilyMini microcontroller connected to a LilyPad Light Sensor, LilyPad Button and two pairs of LilyPad LEDs.

The LilyMini ProtoSnap ships with pre-loaded code that uses all the LilyPad pieces connected to it. This sample code has three modes, which can be selected by pressing the LilyPad Button on the bottom-left side of the ProtoSnap. The built-in RGB LED on the LilyMini will change color to indicate which mode has been selected:

  • White: All LEDs on.
  • Magenta: LEDs fade in and out in a breathing pattern. When the light sensor is covered, LEDs fade faster.
  • Cyan: LEDs off. When the light sensor is covered, LEDs will twinkle.

The LilyMini board, at the center of the ProtoSnap, has a built-in battery holder for a CR2032 battery (included). The board can also be powered through the microUSB port while connected to a computer for reprogramming. On the opposite side of the LilyMini you will find the SAMD11 brain, which controls the ProtoSnap.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

Note: The LilyPad LilyMini ProtoSnap does NOT include sewing needles or conductive thread. These items will need to purchased separately.

GET STARTED WITH THE LILYMINI PROTOSNAP GUIDE

Included on the ProtoSnap:

  • 1x LilyMini (battery included)
  • 1x LilyPad Light Sensor
  • 1x LilyPad Button
  • 4x LilyPad LEDs

Documents:

Specifiche

Part. No. : DEV-14063
Interfaccia : USB
Tensione : 3.3
Tipo Shield : Bluetooth

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on LilyPad LilyMini ProtoSnap

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. LilyPad Arduino Simple Board

    710274 LilyPad Arduino Simple Board

    Questa e' la Lilypad Arduino Simple Board. E' controllata da un ATMega328 con il bootloader Arduino. Ha meno pin della LilyPafalse
    Tasse escluse:
    € 21,40
    IVA inclusa:
    € 26,11
      Confronta
  2. Bobina filo conduttivo - 10m

    710867 Bobina filo conduttivo - 10m

    Bobina da circa 10 metri di filo conduttivo inossidabile, avvolta su rullo in plastica. Da utilizzare per i progetti con Lylifalse
    Tasse escluse:
    € 4,50
    IVA inclusa:
    € 5,49
      Confronta
  3. LilyPad Arduino 328 Main Board

    713342 LilyPad Arduino 328 Main Board

    The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles false
    Tasse escluse:
    € 12,97
    IVA inclusa:
    € 15,82
      Confronta
  4. Smooth Thread Bobbin - 12m (Stainless Steel)

    713814 Smooth Thread Bobbin - 12m (Stainless Steel)

    This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew upfalse
    Tasse escluse:
    € 5,15
    IVA inclusa:
    € 6,28
      Confronta