120017 2x2A Motor Shield for Arduino Twin

2x2A Motor Shield for Arduino Twin

This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output current up to 2A each channel.
Categorie
Prezzi IVA inclusa
€ 16,48 Prezzo
€ 13,51 + VAT

 

Dettagli

Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output current up to 2A each channel.  Stack up this shield on your controller and drive motors with  higher power requirements. Depending on the motor of choice, you can make it fast or handle a higher payload. This Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mounted onto standard Arduino Uno R3 e and Arduino Mega.
 
Speed control is achieved through conventional PWM which can be obtained from Arduino’s PWM output Pin 10 and 11. The enable/disable function of the motor control is signalled by Arduino Digital Pin 12 and 13. The Motor shield can be powered directly from Arduino or from external power source. It is strongly encouraged to use external power supply to power the motor shield.

Compatible with:

  • Arduino UNO 
  • Arduino UNO R3
  • Arduino Mega 1280/2560

 

 

SPECIFICATION

 

 

  • Motor Driven Voltage: 4.8V to 35V
  • Output Current: up to 2A/channel
  • Total Power Dissipation: 25W(T=75℃)
  • Driven Structure: Dual full-bridge driver
  • Driven Power Port: External power terminal, or VIN from Arduino
  • Driven Output Port: 2 channel screw terminals, or male PIN headers
  • Control Port: 4 TTL Compatible digital signals (Digital 10-13)
  • Operation Temperature: -25℃ to 130℃
  • Shield Size: 56x57mm(2.20x2.24")

 

 

DOCUMENTS

 

 

 

 

SHIPPING LIST

 

 

  • 2A Motor Shield For Arduino x1

Specifiche

Part. No. : DRI0017
Interfaccia : I/O
Tensione : 5
Tipo Shield : Ctrl Motori

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 2x2A Motor Shield for Arduino Twin

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Ardumoto - Motor Driver Shield

    709815 Ardumoto - Motor Driver Shield

    Shield per Arduino in grado di controllare due motori DC. Basato sull'integrato L298 puo' pilotare fino a 2A per canale.
    Tasse escluse:
    € 20,12
    IVA inclusa:
    € 24,55
      Confronta
  2. Monster Motor Shield

    710182 Monster Motor Shield

    This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we've replaced the L298 false
    Tasse escluse:
    € 55,89
    IVA inclusa:
    € 68,19
      Confronta
  3. 2503 - Pololu Dual MC33926 Motor Driver Shield for Arduino

    582503 2503 - Pololu Dual MC33926 Motor Driver Shield for Arduino

    Motor Driver duale per Arduino basato sul chip MC33926. Alimentazione da 5 a 28V, potenza massima 3A per ogni motore.
    Tasse escluse:
    € 25,96
    IVA inclusa:
    € 31,67
      Confronta
  4. Motor Shield V2.0

    115072 Motor Shield V2.0

    Shield per controllare due motori DC oppure un motore Passo Passo, utilizza il popolare chip L298
    Tasse escluse:
    € 18,64
    IVA inclusa:
    € 22,74
      Confronta
  5. Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.0

    501438 Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.0

    Versione aggiornata del famoso Motorshield Adafruit. Pilota servi, motori a spazzole, passo-passo, etc
    Tasse escluse:
    € 21,30
    IVA inclusa:
    € 25,99
      Confronta
  6. SeeedStudio - 4A Motor Shield

    807940 SeeedStudio - 4A Motor Shield

    The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currentfalse
    Tasse escluse:
    € 37,23
    IVA inclusa:
    € 45,42
      Confronta
  7. 2507 - Pololu Dual VNH5019 Motor Driver Shield for Arduino

    342507 2507 - Pololu Dual VNH5019 Motor Driver Shield for Arduino

    Motor driver basato su VNH5019A per motori con assorbimento continuo fino a 12A (30A di picco). Per Arduino e non.
    Tasse escluse:
    € 40,45
    IVA inclusa:
    € 49,35
      Confronta
  8. 2511 - Pololu DRV8835 Dual Motor Driver Shield for Arduino

    342511 2511 - Pololu DRV8835 Dual Motor Driver Shield for Arduino

    This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible boafalse
    Tasse escluse:
    € 5,84
    IVA inclusa:
    € 7,12
      Confronta
  9. Grove - I2C Mini Motor Driver

    808467 Grove - I2C Mini Motor Driver

    The Grove – Mini I2C motor driver is a very tiny motor driver with I2C interface, and it includes two motor driver chips - DRfalse
    Tasse escluse:
    € 14,89
    IVA inclusa:
    € 18,17
      Confronta
  10. 2517 - Pololu Dual G2 High-Power Motor Driver 18v22 Shield

    342517 2517 - Pololu Dual G2 High-Power Motor Driver 18v22 Shield

    This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discretfalse
    Tasse escluse:
    € 98,00
    IVA inclusa:
    € 119,56
      Confronta
  11. 2515 - Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduin

    342515 2515 - Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduin

    This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discretfalse
    Tasse escluse:
    € 40,45
    IVA inclusa:
    € 49,35
      Confronta