808892 Adafruit FONA 800 Shield - Voice/Data Cellular GSM for Arduino

Adafruit FONA 800 Shield - Voice/Data Cellular GSM for Arduino

Introducing Adafruit FONA 800 Shield, an adorable all-in-one cellular phone shield that lets you add voice, text, SMS and data to your project in an easy to use pluggable shield.
Prezzi IVA inclusa
€ 45,31 Prezzo
€ 37,14 + VAT

 

Dettagli

Ring, Ring! Who's that callin'? It's your Arduino! Introducing Adafruit FONA 800 Shield, an adorable all-in-one cellular phone shield that lets you add voice, text, SMS and data to your project in an easy to use pluggable shield.

This shield fits on top of any classic Arduino or compatible, and packs a surprising amount of technology into it's little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything. 

 

  • Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
  • Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
  • Send and receive SMS messages
  • Send and receive GPRS data (TCP/IP, HTTP, etc.)
  • Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)
  • PWM/Buzzer vibrational motor control
  • AT command interface with "auto baud" detection

Sounds delicious, right? So we plated this fine module onto a shield with all the extras you need to make your next project shine.

  • Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge via the Arduino when necessary. Two LEDs let you know when its charging and done. You can then flip the switch and use the battery to run your circuit!
  • Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic
  • Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone
  • Level shifting circuitry to make it Arduino-safe
  • Vibrational motor (buzzer) driver so you can have noiseless notifications
  • uFL connection for external antenna
  • Indicator LEDs for power and network connectivity
  • Any standard 2G SIM slides into a secure connector

On its own, this shield can't do anything. It requires a microcontroller like an Arduino to drive it!  You will also need some required accessories to make FONA work. These are not included!

  • SIM Card! A 2G Mini SIM card is required to do anything on the cellular network. US AT&T no longer sells 2G SIMs and will shut off their 2G network, so for American customers we recommend any T-Mobile or reseller (TING, SIMPLE mobile, etc) that uses the T-Mobile network.
  • Lipoly Battery - 500mAh or larger! This 500mAh battery, or this 1200mAh will work great.
  • External Antenna - This slim uFL antenna works great!

Each order comes with one tested and assembled FONA shield and a stick of 0.1" male header. Required Arduino, SIM card, battery, antenna and other accessories are not included! Some light soldering is required to put the headers onto the shield. You can also grab some stacking headers if you would like to stack a shield on top.

There's also some recommended accessories. They are not required but chances are you'll want them!

  • TRRS 4-Pole Headset - Any 'iPhone' or 'Android' compatible (but not iPhone original) should work. We tried about 10 different ones, and basically the more expensive once are more comfortable and louder but our official iPhone headset mic did not work.
  • External Mic & Speaker - If you want to talk directly to your FONA, an electret mic and mini 8 ohm speaker will do quite nicely.
  • Vibrating motor - the FONA can drive this directly, just solder a mini vibrating motor disc in!

Check out our tutorial for all of the details that you can dream of!

Revision History:

  • As of January 18, 2016 we have replaced the SIM800L module with SIM800H which is backward compatible. Note that this board design does not have a bluetooth antenna on it so you cannot use the BT capabilities of the SIM800H
  • As of January 10, 2017 we've upgraded the module to the latest available firmware, its backwards compatible. But the 8 ohm speaker output is a little quieter

Dimensions:

  • 53mm x 69mm x 7mm / 2.1" x 2.7" x 0.3"
  • Weight: 17g

Datasheets, EagleCAD PCB files, and Fritzing object available in the product tutorial.


Specifiche

Part. No. : 2468
Interfaccia : Seriale
Tensione : 5
Tipo Shield : Wireless, Sensori

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit FONA 800 Shield - Voice/Data Cellular GSM for Arduino

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

    807892 SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

    This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-andfalse
    Tasse escluse:
    € 4,42
    IVA inclusa:
    € 5,39
      Confronta
  2. Adafruit FONA - Mini Cellular GSM Breakout - SMA Version

    807893 Adafruit FONA - Mini Cellular GSM Breakout - SMA Version

    Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your projefalse
    Tasse escluse:
    € 47,67
    IVA inclusa:
    € 58,16
      Confronta
  3. Adafruit FONA - Mini Cellular GSM Breakout uFL Version

    807894 Adafruit FONA - Mini Cellular GSM Breakout uFL Version

    Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your projefalse
    Tasse escluse:
    € 42,40
    IVA inclusa:
    € 51,73
      Confronta
  4. Adafruit Feather 32u4 FONA

    808618 Adafruit Feather 32u4 FONA

    This is the Adafruit Feather 32u4 FONA - our take on an 'all-in-one' Arduino-compatible + audio/sms/data capable cellular witfalse
    Tasse escluse:
    € 47,67
    IVA inclusa:
    € 58,16
      Confronta
  5. Adafruit FONA 808 Shield - Mini Cellular GSM + GPS for Arduino

    808891 Adafruit FONA 808 Shield - Mini Cellular GSM + GPS for Arduino

    Cellular + GPS tracking, all in one, for your Arduino? Oh yes! Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one false
    Tasse escluse:
    € 56,00
    IVA inclusa:
    € 68,32
      Confronta
  6. Adafruit FONA 3G Cellular Breakout - European version

    808893 Adafruit FONA 3G Cellular Breakout - European version

    The FONA 3G has better coverage, GSM backwards-compatibility and even sports a built-in GPS module for geolocation & assefalse
    Tasse escluse:
    € 74,05
    IVA inclusa:
    € 90,34
      Confronta