713262 CAN-BUS Shield

CAN-BUS Shield

This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.
Categorie
Prezzi IVA inclusa
€ 30,61 Prezzo
€ 25,09 + VAT

 

Dettagli

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.

It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM506 GPS module. These features make this shield ideal for data logging application.

Note: A DS9 Cable is not included with this shield. Please be sure to check Recommended Products section below for a recommended cable to use with this board.

Note: This product is a collaboration with SK Pang Electronics. A portion of each sales goes back to them for product support and continued development.

Features

  • CAN v2.0B up to 1 Mb/s
  • High speed SPI Interface (10 MHz)
  • Standard and extended data and remote frames
  • CAN connection via standard 9-way sub-D connector
  • Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.
  • Socket for EM506 GPS module
  • Micro SD card holder
  • Connector for serial LCD
  • Reset button
  • Joystick control menu navigation control
  • Two LED indicator

Documents:

Specifiche

Part. No. : DEV-13262
Interfaccia : SPI
Tensione : 5
Tipo Shield : Comunicazione

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on CAN-BUS Shield

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Arduino Stackable Header - 8 Pin

    709279 Arduino Stackable Header - 8 Pin

    This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields.
    Tasse escluse:
    € 0,29
    IVA inclusa:
    € 0,35
      Confronta
  2. Arduino Stackable Header - 6 Pin

    709280 Arduino Stackable Header - 6 Pin

    This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.
    Tasse escluse:
    € 0,29
    IVA inclusa:
    € 0,35
      Confronta
  3. Convertitore OBD II / UART

    709555 Convertitore OBD II / UART

    Questa scheda permette di interfacciarsi con il bus OBD-II via UART. Sono supportati gli standard più diffusi come il CAN e ifalse
    Tasse escluse:
    € 49,27
    IVA inclusa:
    € 60,11
      Confronta
  4. Cavo OBD-II / DB9

    710087 Cavo OBD-II / DB9

    Cavo da OBD-II a DB9 femmina da usare con apposita interfaccia.
    Tasse escluse:
    € 9,52
    IVA inclusa:
    € 11,61
      Confronta
  5. Arduino Stackable Header - 10 Pin

    711376 Arduino Stackable Header - 10 Pin

    Connettore femmina a 10 pin extra lunghi, ottimi per essere utilizzato con gli shield Arduino R3
    Tasse escluse:
    € 0,41
    IVA inclusa:
    € 0,50
      Confronta
  6. CAN BUS Shield For Arduino

    120370 CAN BUS Shield For Arduino

    This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNOfalse
    Tasse escluse:
    € 20,67
    IVA inclusa:
    € 25,22
      Confronta
  7. USB-CAN Analyzer

    809047 USB-CAN Analyzer

    Analizzatore di CAN BUS economico di alta qualita'. Semplice da usare, consente di comunicare con i dispositivi su CAN BUS cofalse
    Tasse escluse:
    € 24,40
    IVA inclusa:
    € 29,77
      Confronta
  8. CAN-BUS Shield V2

    809151 CAN-BUS Shield V2

    CAN-BUS Shield which adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino/Seefalse
    Tasse escluse:
    € 22,40
    IVA inclusa:
    € 27,33
      Confronta
  9. SparkFun AST-CAN485 Dev Board

    714483 SparkFun AST-CAN485 Dev Board

    The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the ufalse
    Tasse escluse:
    € 46,62
    IVA inclusa:
    € 56,88
      Confronta
  10. SparkFun AST-CAN485 WiFi Shield

    714597 SparkFun AST-CAN485 WiFi Shield

    Shield WiFi con ESP8266, per la scheda AST-CAN485 Dev Board
    Tasse escluse:
    € 17,47
    IVA inclusa:
    € 21,31
      Confronta
  11. SparkFun AST-CAN485 I/O Shield (24V)

    714598 SparkFun AST-CAN485 I/O Shield (24V)

    Shield con interfaccia I/O a 24V, per la scheda AST-CAN485 Dev Board
    Tasse escluse:
    € 21,45
    IVA inclusa:
    € 26,17
      Confronta
  12. SparkFun RedBoard Artemis

    715444 SparkFun RedBoard Artemis

    Scheda Arduino compatibile, con modulo Bluetooth BLE Artemis, 1MB di memoria Flash e 384K di RAM, clock 48/96MHz. Connettori false
    Tasse escluse:
    € 19,60
    IVA inclusa:
    € 23,91
      Confronta