Dettagli
The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Arduino/Seeeduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features.
The on board DC/DC converter suport a very wide range of input voltage, and can provide a 5V power supply for the microcontroller board with 100mA maximun current.So, you just need one power supply to drive the motors and power up the logic circuit.
Specifications
Operating Voltage: 6V ~ 28V
DC/DC output: 5V 100mA @ "5V" pin
Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak)
Output Duty Range: 0%~100%
Output short-circuit protection (short to VPWR or GND)
Over-current limiting (regulation) via internal constant-off-time PWM
Temperature dependant current limit threshold reduction
Documents
Please visit our wiki page for more info about this product.
Specifiche
Part. No. : | 105030004 |
Interfaccia : | I/O |
Tensione : | 3.3, 5 |
Tipo Shield : | Ctrl Motori |
Questions on SeeedStudio - 4A Motor Shield
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
709815 Ardumoto - Motor Driver Shield
Shield per Arduino in grado di controllare due motori DC. Basato sull'integrato L298 puo' pilotare fino a 2A per canale. -
115072 Motor Shield V2.0
Shield per controllare due motori DC oppure un motore Passo Passo, utilizza il popolare chip L298 -
120017 2x2A Motor Shield for Arduino Twin
This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output currentfalse -
120259 RS485 Shield For Arduino
This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output currentfalse