713956 SparkFun Weather Shield

SparkFun Weather Shield

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature.
Prezzi IVA inclusa
€ 37,77 Prezzo
€ 30,96 + VAT

 

Dettagli

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.

The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.

Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.

Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.

Note: This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.

GET STARTED WITH THE SPARKFUN WEATHER SHIELD GUIDE

  • Humidity/Temperature Sensor — Si7021
  • Barometric Pressure — MPL3115A2
  • Light Sensor — ALS-PT19
  •  

  • Schematic
  • Eagle Files
  • Hookup Guide
  • Weather Station Tutorial
  • Datasheets
  • Wish List
  • GitHub
  • Specifiche

    Part. No. : DEV-13956
    Tensione : 3.3, 5
    Tipo Shield : Sensori

    Tags prodotto

    Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

    Questions on SparkFun Weather Shield

    No questions asked yet

    Fai una domanda (Registrati oppure Esegui il Login ).
    Fai una domanda (Registrati oppure Esegui il Login ).
    1. Arduino Stackable Header - 8 Pin

      709279 Arduino Stackable Header - 8 Pin

      This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields.
      Tasse escluse:
      € 0,29
      IVA inclusa:
      € 0,35
        Confronta
    2. Arduino Stackable Header - 6 Pin

      709280 Arduino Stackable Header - 6 Pin

      This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.
      Tasse escluse:
      € 0,29
      IVA inclusa:
      € 0,35
        Confronta
    3. Weather Meters

      708942 Weather Meters

      Whether you’re an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can false
      Tasse escluse:
      € 61,66
      IVA inclusa:
      € 75,23
        Confronta
    4. RJ11 6-Pin Connector

      700132 RJ11 6-Pin Connector

      Connettore RJ11 con perni per circuito stampato. 6 pin, accetta i comuni connettori telefonici.
      Tasse escluse:
      € 1,11
      IVA inclusa:
      € 1,35
        Confronta
    5. Arduino Stackable Header - 10 Pin

      711376 Arduino Stackable Header - 10 Pin

      Connettore femmina a 10 pin extra lunghi, ottimi per essere utilizzato con gli shield Arduino R3
      Tasse escluse:
      € 0,41
      IVA inclusa:
      € 0,50
        Confronta
    6. T5403 Barometric Sensor Breakout

      712039 T5403 Barometric Sensor Breakout

      This is the T5403 breakout board, a fully calibrated barometric pressure sensor with an I2C interface. The T5403 sensor measufalse
      Tasse escluse:
      € 11,30
      IVA inclusa:
      € 13,79
        Confronta
    7. SparkFun Atmospheric Sensor Breakout - BME280

      713676 SparkFun Atmospheric Sensor Breakout - BME280

      The SparkFun BME280 Atmospheric Sensor Breakout is the easy way to measure barometric pressure, humidity, and temperature reafalse
      Tasse escluse:
      € 17,44
      IVA inclusa:
      € 21,28
        Confronta
    8. SparkFun Line Follower Array

      713582 SparkFun Line Follower Array

      The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital false
      Tasse escluse:
      € 24,81
      IVA inclusa:
      € 30,27
        Confronta
    9. SparkFun Humidity and Temperature Sensor Breakout - Si7021

      713763 SparkFun Humidity and Temperature Sensor Breakout - Si7021

      The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor.
      Tasse escluse:
      € 9,47
      IVA inclusa:
      € 11,55
        Confronta
    10. SparkFun Air Quality Breakout - CCS811

      714193 SparkFun Air Quality Breakout - CCS811

      The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a wide range of Total Volatile Organic Compoundsfalse
      Tasse escluse:
      € 20,90
      IVA inclusa:
      € 25,50
        Confronta

    Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

    Price Match



    * Campi richiesti

    Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

    Grazie per la tua fiducia in Robot Italy!