Dettagli
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.
The AT42QT1010 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch. As long as a touch (e.g. from a finger) is detected, the AT42QT1010 keeps the output line high. Otherwise, the line is kept low. You just need to provide a power source (1.8V - 5V) and ground for the AT42QT1010 to work. Additionally, a PAD pin is available if you would like to create your own external electrode.
Documents:
- Schematic
- Eagle Files
- Datasheet (AT42QT1010)
- Hookup Guide
- GitHub
Specifiche
Part. No. : | SEN-12041 |
Questions on AT42QT1010 Capacitive Touch Breakout
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
191129 1129 B - Touch sensor
Sensore capacitivo sensibile al tocco anche attraverso materiali tipo plastica, carta, vetro; con spessori fino a 12mm. Cavo false -
511362 Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -
Modulo con 5 pads conduttivi dove collegare i punti di contatto. Non e' richiesto un microcontrollore per il funzionamento, ifalse -
807653 CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakofalse -
713144 SparkFun Touch Potentiometer
The SparkFun Touch Potentiometer, or Touch Pot for short, is an intelligent linear capacitive touch sensor that implements pofalse -
713612 Thermocouple Connector - PCC-SMP-K
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. -
120129 Capacitive Touch Kit For Arduino
This DFRobot touch kit comes with three types touch sensors. An ipod styple wheel touch, a keypad touch which supports backlifalse