Dettagli
This is a simple 8" long 2.5mm audio cable. It is terminated with a 2.5mm audio plug on one side and unterminated with bare wires on the other end. These are to be used with the ModKit shields.
The 2.5mm plug is the same one used by many devices. A lot of older cell phones used this size for the headsets. It is the audio jack size generally used on a lot of portable electronics that didn't use the traditional 3.5mm headphone jack. Also, the Rebel line of Canon dSLRs use this jack for shutter control. See the link below for creating your own
Note: This is not the more common 3.5mm (1/8") jack size. They will not work with 3.5mm jacks.
Documents:
Questions on Jack 2.5mm stereo con cavo 20cm
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).|
Raspberry Pi 3 Model B+ BCM2837 1.4GHz 
Tasse escluse:
€ 35,20
IVA inclusa:
€ 42,94
|
|
ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD 
Tasse escluse:
€ 24,60
IVA inclusa:
€ 30,01
|
-
714968 SparkFun gator:control ProtoSnap
Tasse escluse:€ 10,40IVA inclusa:€ 12,69 -
714874 SparkFun Configurable OpAmp Boar...
Tasse escluse:€ 5,00IVA inclusa:€ 6,10 -
714891 SparkFun gator:starter ProtoSnap
Tasse escluse:€ 10,40IVA inclusa:€ 12,69 -
715033 USB Logic Analyzer - 25MHz/8-Cha...
Tasse escluse:€ 25,00IVA inclusa:€ 30,50 -
343172 3172 - Pololu USB AVR Programmer...
Tasse escluse:€ 8,80IVA inclusa:€ 10,74
Non ci sono prodotti da comparare
-
-
Cavo HDMI High Speed con Ethernet A/A M/M 2 m Nero
Tasse escluse:€ 4,30IVA inclusa:€ 5,25Non disponibile
-
-
Cavo HDMI High Speed con Ethernet A/A M/M 3 m Nero
Tasse escluse:€ 5,10IVA inclusa:€ 6,22Non disponibile
-
Cavetto Jumper F/F passo 2.54mm - 3 pin, 30cm
Tasse escluse:€ 1,59IVA inclusa:€ 1,94Non disponibile
-
Connettore coassiale 2,1mm per alimentazione - da breadboard
Tasse escluse:€ 0,93IVA inclusa:€ 1,13Non disponibile
-
-
