Dettagli
The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 1A at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals.
The Relays on the WIFI008 can be controlled from the inputs on the WIFI484. This offers the opportunity to construct a system where an input can control an output anywhere on the earth provided both locations are connected to the network/internet.
Operating Temperature
-20C to +70C
LED Indication
The WIFI008 provides an LED to indicate each of the relay states and three for board status, these are:
Board power - red LED
WIFI connected - yellow LED
USB connected - green LED
Specifiche
Part. No. : | WIFI008 |
Interfaccia : | WiFi |
Rele' : | 8 |
Questions on WIFI008 - 8 Relays at 16A
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
807759 WIFI484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs
The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analfalse -
808407 WIFI002 - 2 Relays at 16A
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from false -
808975 BT004BLE - 4 x 16A Bluetooth Relay
The BT004BLE provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HM10 Bfalse -
809230 ESP32LR88 - WIFI 8 x 16A relays
ESP32LR88 - Scheda WiFi con modulo ESP32, con 8 Rele' da 16A e 8 ingressi digitali. Utilizzabile anche con carichi induttivi false -
809253 ESP32LR20 - WIFI 2 x 16A relays
ESP32LR20 - Scheda WiFi con modulo ESP32, con 2 Rele' da 16A Utilizzabile anche con carichi induttivi come contattori, solenofalse -
809254 ESP32LR42 - WIFI 4 x 16A relays
ESP32LR42 - Scheda WiFi con modulo ESP32, con 4 Rele' da 16A e 2 ingressi digitali. Utilizzabile anche con carichi induttivi false -
882011 XE1201 - Snubber
Componente RC utilizzato per sopprimere i transienti che si verificano nei Rele' quando si pilotano carichi induttivi. Prolunfalse -
809445 ESP32SR88 - WIFI 8 x 1A relays
ESP32LR88 - Scheda WiFi con modulo ESP32, con 8 Rele' da 16A e 8 ingressi digitali. -
809502 dS2242 - 2 x 16A ethernet relay
Questo modulo fornisce 2 relè con contatti da 16A, 8 inputs analogici; pilotabili tramite rete LAN. Il modulo viene alimentafalse