Dettagli
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of the cable are terminated with female ends to mate with test hooks (coming soon!).
The pin-out of the connector is documented here.
Questions on Bus Pirate Cable
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).|
Raspberry Pi 3 Model B+ BCM2837 1.4GHz 
Tasse escluse:
€ 35,20
IVA inclusa:
€ 42,94
|
|
ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM 
Tasse escluse:
€ 18,00
IVA inclusa:
€ 21,96
|
-
809290 Teensy 3.6 with Header Pins
Tasse escluse:€ 31,00IVA inclusa:€ 37,82 -
809289 A20-SOM204 - A20 DUAL CORE CORTE...
Tasse escluse:€ 57,00IVA inclusa:€ 69,54 -
809288 Speaker - 40mm Diameter - 4 Ohm ...
Tasse escluse:€ 5,70IVA inclusa:€ 6,95 -
809287 Adafruit BMP388 - Precision Baro...
Tasse escluse:€ 11,00IVA inclusa:€ 13,42 -
809286 Adafruit MPRLS Ported Pressure S...
Tasse escluse:€ 16,50IVA inclusa:€ 20,13
Non ci sono prodotti da comparare
-
Micro SD Card Extender - 68cm (26 inch) long cable
Tasse escluse:€ 7,58IVA inclusa:€ 9,25Non disponibile
-
Cavo per Strumentazione - Banana + Coccodrillo
Tasse escluse:€ 3,60IVA inclusa:€ 4,39Non disponibile
-
-
