Dettagli
The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.
It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM506 GPS module. These features make this shield ideal for data logging application.
Note: A DS9 Cable is not included with this shield. Please be sure to check Recommended Products section below for a recommended cable to use with this board.
Note: This product is a collaboration with SK Pang Electronics. A portion of each sales goes back to them for product support and continued development.
Features
- CAN v2.0B up to 1 Mb/s
- High speed SPI Interface (10 MHz)
- Standard and extended data and remote frames
- CAN connection via standard 9-way sub-D connector
- Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.
- Socket for EM506 GPS module
- Micro SD card holder
- Connector for serial LCD
- Reset button
- Joystick control menu navigation control
- Two LED indicator
Documents:
- Schematic
- Eagle Files
- Datasheet (MCP2515)
- Datasheet (MCP2551)
- Hookup Guide
- OBD-II Guide
- GitHub (Design Files)
- GitHub (Library & Example Code)
Specifiche
Part. No. : | DEV-13262 |
Interfaccia : | SPI |
Tensione : | 5 |
Tipo Shield : | Comunicazione |
Questions on CAN-BUS Shield
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
709279 Arduino Stackable Header - 8 Pin
This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. -
709280 Arduino Stackable Header - 6 Pin
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. -
709555 Convertitore OBD II / UART
Questa scheda permette di interfacciarsi con il bus OBD-II via UART. Sono supportati gli standard più diffusi come il CAN e ifalse -
710087 Cavo OBD-II / DB9
Cavo da OBD-II a DB9 femmina da usare con apposita interfaccia. -
711376 Arduino Stackable Header - 10 Pin
Connettore femmina a 10 pin extra lunghi, ottimi per essere utilizzato con gli shield Arduino R3 -
120370 CAN BUS Shield For Arduino
This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNOfalse -
809047 USB-CAN Analyzer
Analizzatore di CAN BUS economico di alta qualita'. Semplice da usare, consente di comunicare con i dispositivi su CAN BUS cofalse -
809151 CAN-BUS Shield V2
CAN-BUS Shield which adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino/Seefalse -
714483 SparkFun AST-CAN485 Dev Board
The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the ufalse -
714597 SparkFun AST-CAN485 WiFi Shield
Shield WiFi con ESP8266, per la scheda AST-CAN485 Dev Board -
714598 SparkFun AST-CAN485 I/O Shield (24V)
Shield con interfaccia I/O a 24V, per la scheda AST-CAN485 Dev Board -
715444 SparkFun RedBoard Artemis
Scheda Arduino compatibile, con modulo Bluetooth BLE Artemis, 1MB di memoria Flash e 384K di RAM, clock 48/96MHz. Connettori false