Dettagli
Version 3.2 is a minor upgrade to Teensy 3.1. The main change is an improved 3.3V regulator, to allow Teensy to directly power ESP8266 Wifi, WIZ820io (W5200) Ethernet, and other power-hungry 3.3V devices.
We're specifying Teensy 3.2's power output at 250 mA and the maximum voltage input at 6 volts, due to PCB thermal dissipation limits. However, the actual regulator chip is capable of up to 10 volts input, and up to 500 mA output. These higher limits are intended to allow Teensy 3.2 to be more rugged when used with non-USB power sources which aren't well regulated 5 volt sources.
Teensy 3.2 is fully compatible with all shields and add-on boards designed for Teensy 3.1. It preserves the same size, pinout, and processor as Teensy 3.1.
The bootloader chip is also changed from Mini54 to KL02 (the same as Teensy-LC). A full schematic is available:
http://www.pjrc.com/teensy/schematic.html
Teensy 3.1 specs
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! On top of everything else the Teensy has been gifted with more RAM (64K, thats 4x more than the Teensy 3.0) and 256kb of flash memory! The Teensy 3.1 now has 5V tolerance on its digital inputs however all analog-only pins are still 3.3V only.
Note: This does not come with a USB cable, please check below for an appropriate one.
Dimensions: 1.4 x 0.7" (~35 x 18 mm)
Features:
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
- 34 Digital I/O Pins (5V tolerance on Digital Inputs)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, I2C, I2S,CAN Bus, IR modulator
- I2S (for high quality audio interface)
- Real Time Clock (with user-added 32.768 crystal and battery)
- 16 DMA channels (separate from USB)
- Touch Sensor Inputs
Documents:
- Datasheet (MK20DX256VLH7)
- Teensy Quickstart
- Teensyduino Software
- Pin Assignment Charts
- Using the RTC
- Product Page
Specifiche
Part. No. : | TEENSY32 |
Questions on Teensy 3.2
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
315002 Strip Maschio Passo 2,54 - 40 pin
Si utilizza nei circuiti stampati per le connessioni con l'esterno. Utilissimo, non puo' mancare in laboratorio. E' facilmentfalsePrezzo IVA incl.
Confronta -
315017 Strip Maschio Passo 2,54 - 40 pin Rosso
Si utilizza nei circuiti stampati per le connessioni con l'esterno. Utilissimo, non puo' mancare in laboratorio. E' facilmentfalse -
310018 Cavo USB 2.0 A Maschio/Micro B Maschio, 100 cm
Cavo USB 2.0 A Maschio/Micro B Maschio -
712767 Teensy Audio Board
This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy false -
807740 OctoWS2811 Adapter for Teensy 3.1 - Control tons of NeoPixels!
This adapter board connects the Teensy 3.1 to up to thousands of WS2811/WS2812 (a.k.a NeoPixel) LEDs using the OctoWS2811 Libfalse -
713288 Teensy Arduino Shield Adapter
The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requfalse -
713311 Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter allows you to connect your Teensy with the tried and true XBee series to provide you with a greatfalse -
808421 Teensy LC
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 bringfalse -
808645 Teensy 3.2 - with Header Pins
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse -
808647 Prop Shield With Motion Sensors
This shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flfalse -
808744 WIZ820io & Micro SD Card Adaptor
This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy false -
713925 Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. -
714017 Raspberry Pi GPIO Tall Header - 2x20
This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability tofalse -
809290 Teensy 3.6 with Header Pins
Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 vfalse -
809434 Teensy 4.1
Il Teensy 4.1 equipaggiato con processore ARM Cortex-M7 a 600MHz e' il microcontrollore piu' veloce disponibile oggi sul mercato.