Dettagli
This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, WiFi, Remote control IR, and CAN connectivity. The board can operate with single LiPo backup battery like UPS as it has an internal LiPo battery charger and a step-up converter. Two relays allows you to switch power appliances on and off.
FEATURES
- ESP32-WROOM32 module
- Built-in programmer for Arduino and ESP-SDK
- WiFi, BLE connectivity
- Ethernet 100Mb interface
- MicroSD card
- Two relays 10A/250VAC with LED status
- CAN interface
- IR received and transmitter from 5 meter distance
- LiPo charger for stand alone operation during power breaks with 4 status LEDs
- UEXT connector to connect UEXT modules
- GPIO 40 pin connector with all ESP32 ports
- Dimensions: (75 x 75)mm ~ (2.95 x 2.95)"
Specifiche
Part. No. : | ESP32-EVB |
Questions on ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
502273 MOD-WIFI-ESP8266-DEV - WiFi Module
the ultimate development board for ESP8266 with all GPIOs and resources exposed, can be soldered to PCB or used with breadboafalse -
808419 WiFi Serial Transceiver Module w/ ESP8266 - 1MB Flash
This is WiFi serial transceiver module, based on ESP8266 SoC. -
713287 SparkFun WiFi Shield - ESP8266
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet ofalse -
713678 WiFi Module - ESP8266
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller accesfalse -
713711 SparkFun ESP8266 Thing - Dev Board
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an infalse -
713907 SparkFun ESP32 Thing
Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLEfalse -
808888 ESP-WROOM-32 Wi-Fi and Bluetooth radio
SMD module which you can integrate to your own PCB design. Espressif has took care for all certifications and regulations so false -
808889 ESP32-CoreBoard ESP32 WiFi/BLE development board
ESP32-CoreBoard is easy to prototype development board for the new ESP32 SoC from Espressif, it has dual header pins with 0.1false -
808962 ESP32 Breakout Kit
This is the breakout kit specially made for ESP32, it contains a breakout board and some pin headers. -
714155 SparkFun ESP32 Thing Power Control Shield
The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variefalse -
809015 ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET
This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, and WiFi. -
714430 SparkFun ESP32 Thing Motion Shield
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield’s ofalse -
120478 FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth)
FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode cofalse -
120481 FireBeetle Covers-Proto Board
Proto Board is compatible with products of FireBeetle series. There are 14×7 general 2.54mm solder holes in the board of stanfalse -
809249 ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD
Scheda per Riconoscimento Vocale sviluppata da Espressif. Include un modulo ESP32-WROOM32 -
809280 ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM
Scheda basata sul chip ESP32 con un microcontrollore PIC32MX270F256DT, una potente soluzione IOT con la proverbiale affidabilfalse -
715031 SparkFun WiFi IR Blaster (ESP8266)
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield’s ofalse -
510053 ESP-EYE EMBEDDED CAMERA WITH AI
Scheda che combina un modulo WiFi ESP32 e un modulo ESP-WHO per il Riconoscimento Faccial, implementa tecnologia AI -
715110 SparkFun ESP32 Thing Plus DMX to LED Shield
La scheda ESP32 Thing Plus DMX to LED Shield e' il sistema perfetto per inviare e ricevere segnali su protocollo DMX. -
714689 SparkFun Thing Plus - ESP32 WROOM
La scheda SparkFun ESP32 Thing Plus e' il passo successivo per iniziare con il chip Espressif continuando ad usufruire di tutfalse