Dettagli
Raspberry Pi 0.96’ OLED display module is made by 128x64 yellow and blue OLED pixels , diagonal is only 0.96 inch . The controller is SSD1306, communicates via 4-wire SPI, the display have its own backlight, no backlight LED is required ,This reduces the power required to run the OLED and is why the display has such high contrast , extremely wide viewing angle and extremely operating temperature
Features:
- Ultra low power supply
- Maximum current 100uA
- Keep up current 12.25uA
- Hardware keep up display
- 3.3V work voltage ,([MIN 1.6V] ,[MAX:3.6V])
- Internal DC/DC voltage converter
- SPI driver support , AT 64MHz[TYP] 125MHZ[OB]
- FP frequency: 64fps[TYP] 368fps[OB]
- Compatible with Raspberry Pi A+,B,B+/2.
Specification:
- Outline Drawing: 370x300(mm)
- Number of pixels: 128x64
- Panel size:26.70x19.26x1.45(mm)
- Active area: 21.74x10.864(mm)
- Pixel pitch 0.17x0.17(mm)
- Pixel size: 0.154x0.154(mm)
Document
Specifiche
Part. No. : | 317080006 |
Questions on Raspberry Pi 0.96” OLED Display Module
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
807883 Raspberry Pi Model B+ 512MB RAM
Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse -
808190 Raspberry Pi Model A+ 256MB RAM
The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the modfalse -
808238 Raspberry Pi 2 Model B - 1GB RAM
The new Raspberry Pi 2 - Model B is jam packed with features! With a new quad core processor and twice the memory with a massfalse