Dettagli
Are you a proud geek who also loves the Day of the Dead? Qué bueno! Well, this Day of theGeek LED Skull Badge will be up your alley! This is a DIY soldering kit you'll need to assemble it yourself, but luckily it's very easy and very fast, so this is a good kit for beginners. You even get a wide range of LEDs for the eyes so you can make your skull just the way you like it.
You'll need basic soldering tools, such as an iron, solder, and diagonal cutters. This fun, customizable badge lapel kit includes:
- 1x Skull PCB
- 2x Red LEDs
- 2x Blue LEDs
- 2x White LEDs
- 1x CR2032 Battery holder
- 1x Pin back
Note: This product does not come with 1x CR2032 coin cell battery (to make shipping easier).
Product Dimensions: 60.0mm x 40.4mm x 1.6mm / 2.4" x 1.6" x 0.1"
Product Weight: 7.8g / 0.3oz
Specifiche
| Part. No. : | 3590 |
Questions on Day of the Geek Soldering Badge
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).|
Arduino Starter kit - Italiano 
Tasse escluse:
€ 68,00
IVA inclusa:
€ 82,96
|
|
-
809214 BNO055 - BOSH 9 axis absolute or...
Tasse escluse:€ 17,70IVA inclusa:€ 21,59 -
809213 CMPS12 - Tilt compensated compass
Tasse escluse:€ 23,40IVA inclusa:€ 28,55 -
808834 Supporto per Circuiti Stampati
Tasse escluse:€ 10,80IVA inclusa:€ 13,18
Non ci sono prodotti da comparare
-
DCDC6-16-TO5 - CONVERTOR FROM 6-16V DC TO 5V/2A DC
Tasse escluse:€ 5,95IVA inclusa:€ 7,26Non disponibile
-
-
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
Tasse escluse:€ 1,49IVA inclusa:€ 1,82Non disponibile
-
Breakout Board for L298N Full-Bridge Motor Driver
Tasse escluse:€ 2,97IVA inclusa:€ 3,62Non disponibile
-
Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi
Tasse escluse:€ 7,70IVA inclusa:€ 9,39Non disponibile
-
-
-
Aluminum GT2 Timing Pulley - 6mm Belt - 20 Tooth - 8mm Bore -
Tasse escluse:€ 8,80IVA inclusa:€ 10,74Non disponibile
