Dettagli
Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you're ready to rock.
The LEDs are 'chainable' by connecting the output of one stick into the input of another - see the photo above. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.
Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested. We have a ready-to-go component for this in the Adafruit EAGLE library
The LEDs are 'chainable' by connecting the output of one stick into the input of another - see the photo above. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.
Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested. We have a ready-to-go component for this in the Adafruit EAGLE library
- Dimensions: 51.10mm / 2" x 10.22mm / 0.4" x 3.19mm / 0.12"
- Weight: 2.57g
Specifiche
Part. No. : | 1426 |
Questions on NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
-
19/12/15 18.29 Salve, chiedevo se la versione che spedite al momento è quella con i WS2812S(6pin) o WS2812B(4pin) dal momento che sul sito adafruit riportano:
"We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED"
grazie.
Prodotti correlati
-
501430 Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix -
Shield Arduino compatibile con 40 LED RGB NeoPixel, utilizza un solo pin dell'arduino per pilotare tutti i LED -
501463 NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers
Anello con 16 LED Neopixel RGB. Libreria Arduino disponibile. -
711820 WS2812 RGB LED Breakout
Modulo con LED RGB WS2812. Questo LED incorpora il circuito di potenza. -
511487 Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix
Pannello con 64 LED RGB in una matrice 8x8. Si pilota con un solo pin del microcontrollore ed ogni LED e' pilotabile singolarfalse -
807603 NeoPixel Ring - 24 x WS2812 5050 RGB LED with Integrated Drivers
Anello con 24 LED Neopixel RGB. Libreria Arduino disponibile. -
712999 LED - RGB Addressable, PTH, 5mm Clear (5 Pack)
This RGB LED has the control IC moved into the actual LED, so we wanted to offer this amazing product to you! They’re great wfalse -
713312 Build Upons LED - PTH (10 Pack)
Each Build Upons PTH LED in this 10 pack are brick shaped in the same form of your favorite construction block! -
713326 LED Mixed Bag - 10mm
The LED Mixed Bag contains one each of our 10mm LEDs. This is a great way to sample each one and decide what your project reafalse -
809179 Blinkt!
Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking thfalse