Do you need a sensor that can measure short distances or detect the motion of objects passing by? This Phidget uses infrared light and a time-of-flight calculation to determine how far away an object is. It can report the distance of the object it's pointed at as often as every 10 milliseconds, and will throw a saturation event when the distance exceeds the sensor's maximum range. Since infrared light is what it uses for the measurement, highly reflective objects will be easier to measure.
The DST1000 connects to a VINT hub. Have a look at the "Compatible Products" tab for a list of Phidgets with VINT ports.
Note: The label on the enclosure that reads "0-200mm" is innacurate. In optimal conditions, this sensor will have a maximum distance of approximately 170mm.
|Sensor Type||Infrared (Time-of-Flight)|
|Measurement Distance Min||4 mm|
|Measurement Distance Max||* 170 mm|
|Measurement Distance Resolution||1 mm|
|Measurement Distance Noise||3 mm|
|Sampling Interval Max||60 s/sample|
|Sampling Interval Min||10 ms/sample|
|Current Consumption Max||4 mA|
|Current Consumption Min||20 μA|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
* - Maximum distance depends on the reflectivity of the surface of the object. Typical results are around 170mm, but could be as low as 100mm for some surfaces. The "200mm" listed on the enclosure is incorrect.
|Part. No. :||DST1000|
|VINT Type :||Distanza|
Questions on Distance Phidget
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).