Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket on one end, but only the first 26 pins have a cable and the other end matches any sort of Cobbler or PermaPi or what-have-you.
Cable is 6" long, and pin #1 is marked with a white wire. This cable is not compatible with the Raspberry Pi Model A or B - It's for the A+ and B+ only!
Available in slimming Adafruit Black - pin #1 is marked with a white stripe!
Note: The Raspberry Pi Model A+ is also compatible with this product!
- 173mm x 33mm / 6.8" x 1.3"
- Weight: 14.4g
|Part. No. :||1986|
Questions on Downgrade GPIO Ribbon Cable for Raspberry Pi A+/B+ 40p to 26p
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).