Dettagli
This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug to:
OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PIC32-PINGUINO-OTG, DUINOMITE and DUINOMITE-MEGA
- Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
- Recommended charge current 22mA
- Max charge current 55mA
- Recommended discharge current 55mA
- Max discharge current 110mA
- Impedance 60mOhm at 1KHz
- Operating temperature: at charge 0-55C, at discharge -25C+60C
- Capacity loss after 500 cycles full charge/discharge at 20C: 20%
- Dimensions 30x17x3mm
The battery has overcharge and short circuit protection.
Specifiche
Part. No. : | BATTERY-LiPo110mAh |
Questions on BATTERY-LiPo110mAh - RECHARGABLE LI-PO BATTERY 3.7V 110MAH WITH JST CONNECTOR
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
500212 USB-uLiPo - USB LI-PO BATTERY CHARGER
A low cost and very compact Li-Po battery charger, based on Microchip MCP73833 with three status LEDs for displaying the battfalse -
500219 BATTERY-LIPO3000mAh
This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit falsePrezzo IVA incl.
Confronta -
500220 BATTERY-LIPO4400mAh
This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit false -
510043 BATTERY-LIPO250mAh - RECHARGABLE LI-PO BATTERY 3.7V 250MAH WITH JST CONNECTOR
This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug