Dettagli
Controlled over WIFI using preprogrammed command sets or html page.
The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It provides 8 relays capable switching up to 16Amps and 8 digital inputs with pull-ups than can interface directly with volt free contacts. The normally open relay contacts have snubbers fitted across them, and can drive inductive loads such as contactors and solenoids. Power for the board is 12v dc, which can be provided by a standard universal wall power supply. A 1A or greater supply should be selected.
Control Protocols
1. Simple plain text commands sent to the module.
2. HTML commands
3. MQTT
4. A built in webpage
WiFi
The ESP32LR88 connects via WiFi to your network. Therefore it must be located in a position where it gets a good WiFi signal. The module should not be enclosed in a metal box/cabinet as this will shield the WiFi signal. You can check the signal level by looking at the RSSI figure which is reported by the ST (STatus) command.
Relays - 8 with snubbers for inductive loads
Inputs - 8 volt free contact compatible inputs or 3.3v digital inputs
Power - 12V DC adaptor, supplied separately
Control interface - HTTP (webpage), HTML commands, MQTT commands or plain text commands (ASCII terminal)
Relay current - Up to 16Amp @24vdc or 250vac
Output connections - Screw Terminals for N/O N/C and Common contacts.
Programming connection - USB programmable with Arduino IDE
Built around the ESP-WROOM-32, the module is fully customisable around open source software.
Specifiche
Part. No. : | ESP32LR88 |
Interfaccia : | WiFi |
Rele' : | 8 |
Questions on ESP32LR88 - WIFI 8 x 16A relays
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
807759 WIFI484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs
The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analfalse -
808407 WIFI002 - 2 Relays at 16A
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from false -
808408 WIFI008 - 8 Relays at 16A
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from false -
808866 dS378 - 8 x 16A ethernet relay
Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus protocols. Send email notififalse -
809253 ESP32LR20 - WIFI 2 x 16A relays
ESP32LR20 - Scheda WiFi con modulo ESP32, con 2 Rele' da 16A Utilizzabile anche con carichi induttivi come contattori, solenofalse -
809254 ESP32LR42 - WIFI 4 x 16A relays
ESP32LR42 - Scheda WiFi con modulo ESP32, con 4 Rele' da 16A e 2 ingressi digitali. Utilizzabile anche con carichi induttivi false -
809445 ESP32SR88 - WIFI 8 x 1A relays
ESP32LR88 - Scheda WiFi con modulo ESP32, con 8 Rele' da 16A e 8 ingressi digitali.