Dettagli
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 62.5:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.
Key specs at 6 V: 230 RPM and 170 mA at no load, 54 oz-in (3.9 kg-cm) and 2.9 A at stall.
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances at their respective nominal voltages, just with the 12 V motor drawing approximately half the current of the 6 V motor and with the carbon brush versions having longer lifetimes than the one with precious metal brushes.
The CB versions (shown on the right in the picture below), can be differentiated from versions with percious metal brushes (shown on the left) by their copper-colored terminals.
The gearmotors all have 20 mm-diameter gearboxes and 4 mm-diameter gearbox output shafts, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio).
Dimensions
Size: | 20D × 43L mm |
---|---|
Weight: | 44 g |
Shaft diameter: | 4 mm |
General specifications
Gear ratio: | 62.5:1 |
---|---|
Free-run speed @ 6V: | 230 rpm |
Free-run current @ 6V: | 170 mA |
Stall current @ 6V: | 2.9 A1 |
Stall torque @ 6V: | 54 oz·in1 |
Extended motor shaft?: | N |
Motor type: | 2.9A stall @ 6V |
Notes:
- 1 Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
File downloads
Specifiche
Part. No. : | 3452 |
Diam. Asse mm : | 4 |
Questions on 3452 - 63:1 Metal Gearmotor 20Dx43L mm 6V
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
341093 1093 - Pololu 30:1 Micro Metal Gearmotor HP
Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse -
341081 Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 4 mm diameter motor shafts. The setfalse -
341138 1138 - Pololu 20D mm Metal Gearmotor Bracket Pair
These aluminum gearmotor brackets let you securely mount Pololu’s 29:1, 73:1, and 154:1 20D mm metal gearmotors to your project. -
341163 1163 - 73:1 Metal Gearmotor 20Dx42L mm
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 73:1 metal gearbox with a 0.2false