344887 4887 - 99:1 Metal Gearmotor 25Dx69L mm LP 12V with 48 CPR Encoder

4887 - 99:1 Metal Gearmotor 25Dx69L mm LP 12V with 48 CPR Encoder

Motoriduttore 12V con encoder a quadratura ad alta risoluzione. Motore a bassa potenza/consumo
Categorie
Prezzi IVA inclusa
€ 34,61 Prezzo
€ 28,37 + VAT

Qty
 

Dettagli

This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 98.78:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 4741.44 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.

Overview

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors and three power levels of 12 V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). The motor and encoder portion is available by itself (no gearbox) for each combination of power level and nominal operating voltage, and versions without the encoder are also available. Please see the 25D metal gearmotor comparison table for detailed specifications of all our 25D metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application.

Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these gearboxes, the recommended upper limit for instantaneous torque is 15 kg-cm (200 oz-in); we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of a second) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.

Using the encoder

A two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48 counts per revolution of the motor shaft when counting both edges of both channels. To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48. The motor/encoder has six color-coded, 8″ (20 cm) leads terminated by a 1×6 female header with a 0.1″ pitch, as shown in the main product picture. This header works with standard 0.1″ male headers and our male jumper and precrimped wires. If this header is not convenient for your application, you can pull the crimped wires out of the header or cut the header off.

Dimensions

Size: 25D x 69L mm1
Weight: 104 g
Shaft diameter: 4 mm

General specifications

Gear ratio: 98.78:1
No-load speed @ 12V: 55 rpm
No-load current @ 12V: 100 mA
Stall current @ 12V: 1100 mA
Stall torque @ 12V: 115 oz·in
No-load speed @ 6V: 27 rpm2
Stall current @ 6V: 550 mA2
Stall torque @ 6V: 57 oz·in2
Motor type: 1.1A stall @ 12V (LP 12V)
Lead length: 8 in3
Encoders?: Y

Notes:

1 Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
2 This motor will run at 6 V but is intended for operation at 12 V.
3 May vary by a few inches.

Product Page

Specifiche

Part. No. : 4887
Diam. Asse mm : 6

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 4887 - 99:1 Metal Gearmotor 25Dx69L mm LP 12V with 48 CPR Encoder

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Motoriduttore 12Vdc 81RPM Encoder

    420114 Motoriduttore 12Vdc 81RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 5.1 Kg/cm 81 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 17,91
    IVA inclusa:
    € 21,85
      Confronta
  2. Motoriduttore 12Vdc 66RPM Encoder

    420115 Motoriduttore 12Vdc 66RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 6.12 Kg/cm 66 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 17,91
    IVA inclusa:
    € 21,85
      Confronta
  3. Motoriduttore 12Vdc 33RPM Encoder

    420116 Motoriduttore 12Vdc 33RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 10.2 Kg/cm 33 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 17,91
    IVA inclusa:
    € 21,85
      Confronta
  4. 1084 - Pololu Stamped Aluminum L-Bracket Pair for 37D mm Metal Gearmotors

    582566 1084 - Pololu Stamped Aluminum L-Bracket Pair for 37D mm Metal Gearmotors

    These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pafalse
    Tasse escluse:
    € 6,50
    IVA inclusa:
    € 7,93
      Confronta
  5. 2826 - 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder

    342826 2826 - 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder

    This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that prfalse
    Tasse escluse:
    € 32,40
    IVA inclusa:
    € 39,53
      Confronta
  6. 2828 - 150:1 Metal Gearmotor 37Dx73L mm 12V with 64 CPR Encoder (Helical Pinion)

    342828 2828 - 150:1 Metal Gearmotor 37Dx73L mm 12V with 64 CPR Encoder (Helical Pinion)

    This gearmotor is a powerful 12V brushed DC motor with a 150:1 metal gearbox and an integrated quadrature encoder that providfalse
    Tasse escluse:
    € 38,00
    IVA inclusa:
    € 46,36
      Confronta