Hydro dipping is a fun, hands-on way of adding printed designs to any surface! This process can be done on any material that can hold the base coat and can be submerged into water. Works really well with any 3D printed project, but molded and cast parts also benefit. You've probably seen cool videos of motorcycle helmets and ceramic statues being dipped - when done right you can cover an entire shape with colorful ink.
Start by using an ink-jet printer (laser printers wont work!) and print on your design. Solid, abstract and repeating patterns work best because it can be challenging to line up the artwork when you're doing the dip. After printing a pattern or design, the thermal paper is floated on top of a vat of hot water. The ink will float, held together by a thin clear polymer layer on the top. Prepare and slowly dip your piece at a 45 degree angle into the water, the image is transferred onto your project. If it doesn't quite turn out, you can scrub it off before the ink sets.
Note it does take a little practice to get good at this technique, but we have a handy DIY video that takes you through the process with lots of tips!
This thermal paper is A4 size and works best with water-based pigment ink. Comes in a pack of 10 sheets you can cut the sheets down and/or reuse un-printed parts as long as you have enough border space.
Product Dimensions: 300.0mm x 210.0mm x 0.2mm / 11.8" x 8.3" x 0.0"
Product Weight: 8.0g / 0.3oz
|Part. No. :||3539|
Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.
Questions on Hydro Dipping Sheets – 10 Pack of A4 Size Sheets
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
- Grove (Arduino)
- Raspberry PI
- Zoccoli, Strips e Jumpers
- Linux Embedded
- Suono e Voce
- Radio & Wireless
- Display & LED
- Robot in Kit
- Meccanica e Materiali
- Motori Passo Passo
- Controllo Motori & Servi
Tasse escluse:€ 30,00IVA inclusa:€ 36,60
Tasse escluse:€ 725,00IVA inclusa:€ 884,50
Tasse escluse:€ 232,00IVA inclusa:€ 283,04
Tasse escluse:€ 160,00IVA inclusa:€ 195,20
Tasse escluse:€ 402,00IVA inclusa:€ 490,44
Non ci sono prodotti da comparare
Adafruit Precision NXP 9-DOF Breakout Board - FXOS8700 + FXAS21002
Tasse escluse:€ 14,40IVA inclusa:€ 17,57
Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
Tasse escluse:€ 24,04IVA inclusa:€ 29,33
NeoPixel Ring - 24 x WS2812 5050 RGB LED with Integrated Drivers
Tasse escluse:€ 18,70IVA inclusa:€ 22,81
Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V
Tasse escluse:€ 7,22IVA inclusa:€ 8,81