Dettagli
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer which offers high performance, compact size, low consumption and low cost.
It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector.
This model includes a WSUB1G baseline unit plus an RFEM2.4G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and two antennas,a nice Nagoya NA-773 wideband telescopic antenna for Sub-GHz frequencies and a whip helical for 2.4GHz band.
Feature
- Pocket size and light weight
- Solid aluminum metal case
- Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes
- Lifetime free firmware upgrades available, open to community requested features
- High capacity Lipo for 16hs+ of continuous run, rechargeable by USB
- Windows PC client Open Source
- Can be extended with internal Expansion Modules for additional band and functionality
- Wide band coverage to all popular sub-1Ghz ISM bands and 2.4GHz band, including 315MHz, 433MHz, 868MHzand 915MHz, 2.4GHz WiFi, Zigbee, also including UHF TV, 70cm and 33cm HAM radio, GSM, etc. Any frequency from 240MHzto 960MHz and 2350MHz to 2550MHz is supported.
Important
Note this unit does not include RF Generator functionality for the Sub-GHz band, only Spectrum Analyzer functionality is available for the Sub-GHz band. The 2.4GHz band includes standard RF Generator.
Specification
- Frequency band: 240 - 960 MHz and 2.35 – 2.55 GHz
- Frequency span: 112KHz - 100MHz
- Graphics LCD 128x64 pixels, great visibility outdoors
- PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits
- Backlight for great indoor visibility
- 2 standard SMA 50 ohms connector, one for Sub-GHz wideband Nagoya NA-773 telescopic antenna included and another one for 2.4GHz band with helical antenna included.
- Amplitude resolution: 0.5dBm
- Dynamic range: -115dBm to 0dBm
- Absolute Max input power: +5dBm
- Average noise level (typical): -110dBm
- 2.4GHz RF Generator amplitude: -30dBm to +1dBm
- Frequency stability and accuracy (typical): +-10ppm
- Amplitude stability and accuracy (typical): +-3dBm
- Frequency resolution: 1Khz
- Resolution bandwidth (RBW): automatic 2.6Khz to 600Khz
- Weight: 185g
- Size: 113x70x25 mm
RF Explorer handling care suggested link: http://www.rf-explorer.com/care
For more information, please visit here.
Specifiche
Part. No. : | 113030021 |
Questions on RF Explorer - ISM Combo - Analizzatore di spettro RF
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
115024 RF Explorer 2.4G - Analizzatore di spettro RF
Analizzatore di spettro RF digitale portatile. Lavora sulle frequenze ISM più diffuse. Elevata performance, basso consumo, mifalse -
115057 RFEM WSUB3G Module
RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 15-27false -
115078 RF Power Limiter
Limitatore di potenza, ideale per proteggere gli RF Explorer da sorgenti RF di elevata potenza che potrebbero danneggiare i cfalse -
808117 RF Explorer Protection Boot (Yellow)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808118 RF Explorer Protection Boot (Blue)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808119 6GHz 2W SMA Attenuator - 10dB
SMA attenuators are used to reduce the input power, and therefore enable RF Explorer to measure stronger signals. It is also false -
808120 6GHz 2W SMA Attenuator - 30dB
SMA attenuators are used to reduce the input power, and therefore enable RF Explorer to measure stronger signals. It is also false -
808121 RF Explorer Signal Generator (RFE6GEN)
The RF Explorer Signal Generator (RFEGen) is a powerful, wideband fully programmable RF signal generator. It is the perfect cfalse -
808309 RF Explorer Protection Boot (Red)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808360 Nagoya NA-773 antenna
The Nagoya NA-773 antenna is a 50 ohm, SMA male connector telescopic antenna designed for handheld devices operating in 144MHfalse -
808362 RF Explorer LCD screen
This LCD is a screen replacement for RF Explorer, the same custom designed COG LCD model included in all RF Explorer handheldfalse -
808470 RF Explorer Protection Boot (Black)
The RF Explorer protection boot is a custom designed, high quality flexible silicone rubber shield to save your device from sfalse -
808901 RF Explorer H-Loop Near Field Antenna (RFEAN25)
The low-loss design exhibits at least 10dB more sensitivity in the range 20-6000MHz than other H-loop options in the market, false -
808902 RF Explorer Near Field Antenna Kit
The three magnetic H-Loop antennas are very sensitive, compact and easy to use antennas for all sort of radiation sources. -
809062 SMA Push-ON Male/Female adapter
The RF Explorer SMA Push-ON Male/Female adapter is great for repetitive connections to the SMA port. -
809063 RF Explorer 3G+ IoT for Raspberry Pi
RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control any way you wafalse -
809064 RF Explorer 3G+ IoT Shield for Arduino
RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control any way you wafalse -
809153 RF Explorer WSUB1G+
RF Explorer WSUB1G+ is a powerful, high performance digital spectrum analyzer covering the 1GHz frequency range starting at 50KHz. -
809227 RF Explorer Upconverter
RF Explorer Upconverter consente di estendere la gamma di frequenze dell'RF explorer, inoltre puo' funzionare da amplificatorfalse