This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in person
We had these custom made to our specification so that you can use them in existing LCD projects and they'll still work - just that only the red LED will be used (so it will appear red-on-black). The extra two pins (17 and 18) are for the green and blue LEDs. The LCD has resistors on board already so that you can drive it with 5V logic and the current draw will be ~20mA per LED. There's a single LED backlight for the entire display, the image above showing 3 colors at once is a composite!
Comes with a single 16x2 RGB backlight LCD, 10K necessary contrast potentiometer and strip of header. Our tutorials and diagrams will have you up and running in no time!
- 16 characters wide, 2 rows
- Multi-color text on dark background
- Connection port is 0.1" pitch, single row for easy breadboarding and wiring
- Pins are documented on the back of the LCD to assist in wiring it up
- Single RGB LED backlight included can be dimmed easily with a resistor or PWM and uses much less power than LCD with EL (electroluminescent) backlights
- Each R, G, & B LED has a 200 ohm resistor in series so you can power the backlight from 3V or 5VDC. R forward voltage is ~2.2V, G & B are ~3.4V
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used) and 3 PWM pins for the backlight
- Built in character set supports English/Japanese text, see the HD44780 datasheet for the full character set
- Up to 8 extra characters can be created for custom glyphs or 'foreign' language support
- Comes with 10K necessary contrast potentiometer and strip of header
- Screen Dimensions: 27mm x 71mm / 1.1" x 2.8"
Because these were custom made, we don't have a full datasheet, however, the dimensions and pins should match this diagram and the controller will be a HD44780-compatible, see the HD44780 datasheet with the detailed commands for control
Check out our detailed step-by-step Arduino+LCD tutorial
|Part. No. :||399|
Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.
Questions on LCD Display 16x2 - RGB - Negative
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
- Grove (Arduino)
- Raspberry PI
- Zoccoli, Strips e Jumpers
- Linux Embedded
- Suono e Voce
- Radio & Wireless
- Display & LED
- Robot in Kit
- Meccanica e Materiali
- Motori Passo Passo
- Controllo Motori & Servi
712922 LilyPad ProtoSnap Plus KitTasse escluse:€ 55,20IVA inclusa:€ 67,34
Tasse escluse:€ 45,00IVA inclusa:€ 54,90
Tasse escluse:€ 7,20IVA inclusa:€ 8,78
Tasse escluse:€ 15,00IVA inclusa:€ 18,30
Tasse escluse:€ 24,60IVA inclusa:€ 30,01
Non ci sono prodotti da comparare
DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards
Tasse escluse:€ 12,85IVA inclusa:€ 15,68
GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins)
Tasse escluse:€ 3,57IVA inclusa:€ 4,36
SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
Tasse escluse:€ 3,15IVA inclusa:€ 3,84