Dettagli
This is a standard LED Current Meter 50A. The biggest feature is that the LED Current Meter have reversed connection protection to prevent from being burnted out. It measures 0-50A with 2% error. Best suitable for current display in the circuit. Just apply four wires without any extra circuit or components, you will get the readings displayed straight away. Easy to use, and good company with robot applications. It has two color LED display to select, green/red.
Warnings: Please carefully follow the instructions for wiring. The power supply terminal and measurement terminal of this Current Meter are using the same common-ground connect. So, the measurement terminal of current meter must be cascaded after load. The measurement terminal must be link to the ground side, Do NOT link it to positive side, it will damage the meter permently.
APPLICATIONS
- Various circuits
SPECIFICATION
- Measure Current: 0-50A DC
- Power supply voltage: 4-30V DC
- Display mode: 3-bit 0.56 Led digital tube
- Accuracy:2%
- Opening dimension: 45.5mm*26.5mm (1.79"*1.04")
- Dimension: 48mm*29mm*21mm (1.89"*1.14"*0.83")
DOCUMENTS
Specifiche
Part. No. : | DFR0245-R |
Questions on LED Current Meter 50A (Red)
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710285 Analog Panel Meter - 0 to 5 VDC
Voltmetro analogico da pannello. 0 - 5 Vcc -
710286 Analog Panel Meter - 0 to 20mA
Amperometro analogico da pannello. 0 - 20 mA -
807936 Panel Current Meter - 0 to 9.99A
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thfalse