711013 LilyPad MP3

LilyPad MP3

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier.
Prezzi IVA inclusa
€ 48,79 Prezzo
€ 39,99 + VAT

Qty
 

Dettagli

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can put on a micro-SD card.

It can be powered by a 3.7V Lipo battery (charger built-in!), or an external 3.5-6V source. Off the shelf, it will play specific audio files when any of its five trigger inputs are grounded, or you can solder in an RGB rotary encoder (not included) and load new firmware (included in the link below) to add a user interface for track selection and volume control!

The board is compatible with sketches written for the MP3 Player Shield. Our example code uses Bill Porter's MP3 Player library, which makes writing new code very easy. All you need to do is add a microSD card and some speakers, and you're ready to rock.

Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles and also to Arduino LLC to help fund continued development of new tools and new IDE features.

Features:

  • ATmega 328p microprocessor with Arduino bootloader (Pro 3.3V/8MHz)
  • VS1053B MP3 (and many other formats) decoder chip
  • TPA2016D2 stereo amplifier
  • MCP73831 3.7V Lipo charger (preset to 500mA, rate can be changed if desired)
  • Headphone jack
  • Five trigger inputs, also usable as analog, serial and I2C ("Wire") connections
  • Load new firmware (or write your own) using the free Arduino IDE
  • 5V FTDI basic breakout for battery recharging and reprogramming
  • Header for optional RGB rotary encoder (not included, requires soldering)

Documents:

Specifiche

Part. No. : DEV-11013
Tipo Shield : Musica

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on LilyPad MP3

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Lilypad FTDI Basic Breakout - 5V

    710275 Lilypad FTDI Basic Breakout - 5V

    Convertitore LilyPad USB-Seriale con chip FTDI FT232RL - Il pinout e' identico al cavo FTDI e funziona con schede Arduino orifalse
    Tasse escluse:
    € 15,15
    IVA inclusa:
    € 18,48
      Confronta
  2. Bobina filo conduttivo - 10m

    710867 Bobina filo conduttivo - 10m

    Bobina da circa 10 metri di filo conduttivo inossidabile, avvolta su rullo in plastica. Da utilizzare per i progetti con Lylifalse
    Tasse escluse:
    € 4,50
    IVA inclusa:
    € 5,49
      Confronta
  3. Adafruit Audio FX Sound Board - WAV/OGG Trigger with 2MB Flash

    808034 Adafruit Audio FX Sound Board - WAV/OGG Trigger with 2MB Flash

    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how tfalse
    Tasse escluse:
    € 22,40
    IVA inclusa:
    € 27,33
      Confronta
  4. Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V

    808075 Precision LM4040 Voltage Reference Breakout - 2.048V and 4.096V

    It has two very high precision shunt-type voltage references with 750 ohm biasing resistors. One is 2.048V (great for 3.3V refalse
    Tasse escluse:
    € 7,18
    IVA inclusa:
    € 8,76
      Confronta
  5. Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    808107 Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how tfalse
    Tasse escluse:
    € 26,57
    IVA inclusa:
    € 32,42
      Confronta
  6. Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM

    808204 Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM

    Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+ or B+ with this jaunty prototyping HAT kit.
    Tasse escluse:
    € 5,47
    IVA inclusa:
    € 6,67
      Confronta
  7. Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB Flash

    808272 Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB Flash

    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how tfalse
    Tasse escluse:
    € 16,02
    IVA inclusa:
    € 19,54
      Confronta
  8. Inductive Charging Set - 5V @ 500mA max

    808276 Inductive Charging Set - 5V @ 500mA max

    This is a basic charger set, and it does work, providing 5V DC output from the output half when the input half is powered witfalse
    Tasse escluse:
    € 11,20
    IVA inclusa:
    € 13,66
      Confronta
  9. Smooth Thread Bobbin - 12m (Stainless Steel)

    713814 Smooth Thread Bobbin - 12m (Stainless Steel)

    This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew upfalse
    Tasse escluse:
    € 5,15
    IVA inclusa:
    € 6,28
      Confronta