Dettagli
The eTape Liquid Level Sensor from Milone Technologies is a great way to measure the level of a liquid. It has a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed. This results in a change in resistance that corresponds to the distance from the top of the sensor to the surface of the fluid. The sensor's resistive output is inversely proportional to the height of the liquid: the lower the liquid level, the higher the output resistance; the higher the liquid level, the lower the output resistance.
**Note: **These sensors used to have only three pins but they're made with four now. The sensor works the same way as before. See the datasheet for details.
Questions on Liquid Level Sensor - 8"
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
713835 SST Liquid Level Sensor
The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. -
120204 Gravity: Non-contact Digital Water / Liquid Level Sensor For Arduino
This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a pfalse -
120466 Battery Capacity Indicator
Sometimes battery information is not readily available or is hard to understand at a glance. Our Battery Capacity Indicator ifalse -
121304 Gravity: UART MP3 Voice Module
Questo modulo puo' memorizzare oltre 200 file audio e riprodurre file MP3 e WAV -
120347 Infrared Photoelectric Switch
Sensori fotoelettrici, composti da emettitore e ricevitore, lavorano ad una distanza max di 1.5metri, reagiscono quando il fafalse -
120368 Non-contact Capacitive Liquid Level Sensor
Sensore per rilevamento di livello di un liquido attraverso un contenitore non metallico. Sensibilita' regolabile. Uscita on/off -
120344 Fermion: MAX30102 Heart Rate and Oximeter Sensor (Breakout)
Sensore Pulsiossimetro e misuratore di battito cardioco, basato su tecnologia PPG. Interfaccia I2C