191032 1032 - PhidgetLED-64 Advanced

1032 - PhidgetLED-64 Advanced

Il modulo PhidgetLED 64 consente di controllare fino a 64 LED indipendentemente. Ogni LED puo' essere acceso e spento e puo' essere controllata la luminosita'.
Categorie
Prezzi IVA inclusa
€ 104,31 Prezzo
€ 85,50 + VAT

 

Dettagli

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using pulse-width modulation. These LED outputs can also be used to interface other devices that benefit from pulse width modulation (such as buzzers, fans, and other small, simple electronics).

Most standard LEDs have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board output. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA. 

Product Features

  • Independent control of 64 Light Emitting Diodes
  • Pulse-Width Modulation Brightness Control
  • Voltage and Current Control enables support for most types of indicators (LEDs, buzzers, etc)
  • Ships with a 12VDC 2 Amps power supply
  • Connects directly to a computer’s USB port

Comes packaged with

  • A 3018 - Mini-USB Cable 180cm
  • 3021 - 16 Double Ended cables
  • A 12VDC, 2A Power Supply
  • A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)

Note: Cut the Double Ended cables in half and solder the cut end to the LED. Check the Getting Started section of the User Guide for more detailed information.

Resources

Electrical Properties

Current Consumption Min 70 mA
Supply Voltage Min 6 V DC
Supply Voltage Max 15 V DC
PWM Resolution 12 bit
PWM Frequency Max 1 kHz
Selectable Output Voltage Levels 1.7, 2.75, 3.9, 5.0 VDC
Output Current Limit Max (Per LED) 80 mA
LED Current Limit Max 80 mA
LED Current Limit Resolution 1.3 mA
USB Speed Full Speed

Physical Properties

Number of LED Outputs 64
Recommended Wire Size (Power Terminal) 12 to 26 AWG
Power Jack 5.5 x 2.1mm Center Positive
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C

Specifiche

Part. No. : 1032

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 1032 - PhidgetLED-64 Advanced

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 3021 - LED64 Replacement Cable 4-Pack

    193021 3021 - LED64 Replacement Cable 4-Pack

    Cavi aggiuntivi per la scheda 1030 – PhidgetLED-64
    Tasse escluse:
    € 8,80
    IVA inclusa:
    € 10,74
      Confronta