Version 3.2 is a minor upgrade to Teensy 3.1. The main change is an improved 3.3V regulator, to allow Teensy to directly power ESP8266 Wifi, WIZ820io (W5200) Ethernet, and other power-hungry 3.3V devices.
We're specifying Teensy 3.2's power output at 250 mA and the maximum voltage input at 6 volts, due to PCB thermal dissipation limits. However, the actual regulator chip is capable of up to 10 volts input, and up to 500 mA output. These higher limits are intended to allow Teensy 3.2 to be more rugged when used with non-USB power sources which aren't well regulated 5 volt sources.
Teensy 3.2 is fully compatible with all shields and add-on boards designed for Teensy 3.1. It preserves the same size, pinout, and processor as Teensy 3.1.
The bootloader chip is also changed from Mini54 to KL02 (the same as Teensy-LC). A full schematic is available:
Teensy 3.1 specs
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.
All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap in on a breadboard and get to work! On top of everything else the Teensy has been gifted with more RAM (64K, thats 4x more than the Teensy 3.0) and 256kb of flash memory! The Teensy 3.1 now has 5V tolerance on its digital inputs however all analog-only pins are still 3.3V only.
Note: This does not come with a USB cable, please check below for an appropriate one.
Dimensions: 1.4 x 0.7" (~35 x 18 mm)
- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
- 34 Digital I/O Pins (5V tolerance on Digital Inputs)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, I2C, I2S,CAN Bus, IR modulator
- I2S (for high quality audio interface)
- Real Time Clock (with user-added 32.768 crystal and battery)
- 16 DMA channels (separate from USB)
- Touch Sensor Inputs
- Datasheet (MK20DX256VLH7)
- Teensy Quickstart
- Teensyduino Software
- Pin Assignment Charts
- Using the RTC
- Product Page
|Part. No. :||TEENSY32_PINS|
Questions on Teensy 3.2 - with Header Pins
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
310018 Cavo USB 2.0 A Maschio/Micro B Maschio, 100 cmCavo USB 2.0 A Maschio/Micro B MaschioTasse escluse:€ 2,23IVA inclusa:€ 2,72
712767 Teensy Audio BoardThis audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy falseTasse escluse:€ 14,92IVA inclusa:€ 18,20
807740 OctoWS2811 Adapter for Teensy 3.1 - Control tons of NeoPixels!This adapter board connects the Teensy 3.1 to up to thousands of WS2811/WS2812 (a.k.a NeoPixel) LEDs using the OctoWS2811 LibfalseTasse escluse:€ 10,57IVA inclusa:€ 12,90
713288 Teensy Arduino Shield AdapterThe Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requfalseTasse escluse:€ 11,55IVA inclusa:€ 14,09
713311 Teensy 3.1 XBee AdapterThe Teensy 3.1 XBee Adapter allows you to connect your Teensy with the tried and true XBee series to provide you with a greatfalseTasse escluse:€ 8,20IVA inclusa:€ 10,00
808421 Teensy LCThe Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 bringfalseTasse escluse:€ 12,30IVA inclusa:€ 15,01
808443 Teensy 3.2The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalseTasse escluse:€ 20,66IVA inclusa:€ 25,21
808646 Teensy LC - with Header PinsTeensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM CofalseTasse escluse:€ 20,00IVA inclusa:€ 24,40
808647 Prop Shield With Motion SensorsThis shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flfalseTasse escluse:€ 20,41IVA inclusa:€ 24,90
808648 Prop Shield, Low Cost (no Motion Sensors)This shield features a 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for imagefalseTasse escluse:€ 8,90IVA inclusa:€ 10,86
808744 WIZ820io & Micro SD Card AdaptorThis adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy falseTasse escluse:€ 6,90IVA inclusa:€ 8,42
715716 Teensy Arduino Shield AdapterScheda per Teensy 3.x. Consente di utilizzare gli shield Arduino sulla piattaforma TeensyTasse escluse:€ 12,00IVA inclusa:€ 14,64
809434 Teensy 4.1Il Teensy 4.1 equipaggiato con processore ARM Cortex-M7 a 600MHz e' il microcontrollore piu' veloce disponibile oggi sul mercato.Tasse escluse:€ 28,30IVA inclusa:€ 34,53