711723 Mux Shield II

Mux Shield II

Se avete bisogno di molti inputs oppure outputs, questa e' la soluzione! Il MUX (Multiplexer) Shield aggiunge 48 porte I/O all'Arduino
Categorie
Prezzi IVA inclusa
€ 34,25 Prezzo
€ 28,07 + VAT

 

Dettagli

Sometimes you've got way too many inputs, or outputs... or both. How are you going to get them all connected to your Arduino? The Mux Shield, that's how. The Mux Shield II from Mayhew Labs is an upgrade on their previous Mux Shield which makes it possible to route up to 48 analog and digital inputs or digital outputs to and from your Arduino board.

The Mux Shield II improves on the original by moving all of the I/O pins to the end of the board, thus allowing you to add one big connector and hook up a ribbon wire or similar cable solution. This also gets the pins out of the way so that the Mux Shield can be in the middle of a stack, with a shield on top of it, and you can still get to the I/O pins. The pins are arranged into three rows of sixteen and each row can be individually set as a digital input, a digital output or an analog input from the Arduino sketch! Further increasing the flexibility of the board, Mayhew Labs added solder jumpers to the bottom of the board that allow you to shut off this software control feature and "hard wire" the functionality of each row, freeing up the associated Arduino pins for other shields in the stack.

The Mux Shield uses TI 74HC4067 analog multiplexers (mux’s) for input functionality and TI 74HC595 shift registers for output functionality. Don't worry if that's jibberish to you, the included Arduino library wraps it up and makes it very easy-to-use.

The shield comes without any headers so be sure to pick up some stackable shield headers!

Features:

  • Control up to 48 Pins from your Arduino!
  • Multiple modes:
    • Analog Input
    • Digital Input
    • Digital Output
  • Solder Jumpers for Hard-Wired Mode Select
  • Arduino Library and Example Code Available

Documents:

Specifiche

Part. No. : DEV-11723
Tensione : 5
Tipo Shield : Comunicazione, Utilita'

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Mux Shield II

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Arduino Stackable Header - 8 Pin

    709279 Arduino Stackable Header - 8 Pin

    This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields.
    Tasse escluse:
    € 0,29
    IVA inclusa:
    € 0,35
      Confronta
  2. Arduino Stackable Header - 6 Pin

    709280 Arduino Stackable Header - 6 Pin

    This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.
    Tasse escluse:
    € 0,29
    IVA inclusa:
    € 0,35
      Confronta
  3. Arduino UNO R3 con microcontrollore ATmega328

    500143 Arduino UNO R3 con microcontrollore ATmega328

    La nuova scheda Arduino Uno R3. Oltre a tutte le caratteristiche delle schede precedenti, la Uno ora utilizza un ATmega16U2 ifalse
    Tasse escluse:
    € 17,30
    IVA inclusa:
    € 21,11
      Confronta
  4. Arduino Stackable Header - 10 Pin

    711376 Arduino Stackable Header - 10 Pin

    Connettore femmina a 10 pin extra lunghi, ottimi per essere utilizzato con gli shield Arduino R3
    Tasse escluse:
    € 0,41
    IVA inclusa:
    € 0,50
      Confronta
  5. Adafruit TCA9548A I2C Multiplexer

    808477 Adafruit TCA9548A I2C Multiplexer

    A way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttfalse
    Tasse escluse:
    € 7,58
    IVA inclusa:
    € 9,25
      Confronta
  6. SparkFun Multiplexer Breakout - 8 Channel (74HC4051)

    713906 SparkFun Multiplexer Breakout - 8 Channel (74HC4051)

    The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/dfalse
    Tasse escluse:
    € 2,70
    IVA inclusa:
    € 3,29
      Confronta