Dettagli
A Feather board without ambition is a Feather board without FeatherWings! This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave.
Put on your sunglasses before staring into these 32 configurable eye-blistering RGB LEDs. Arranged in a 4x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. On the bottom we have jumpers for the DIN line to any of the I/O pins on a Feather. You can cut the default jumper trace and use any pin you like.
To make it easy to start, the LEDs are by default powered from either the USB power line or Battery power line, whichever is higher. Two Schottky diodes are used to switch between the two. This power arrangement is able to handle 1 Amp of constant current draw and maybe 2A peak, so not a good way to make a flashlight. It's better for colorful effects.
A level-up shifter converts the 3.3V logic of the Feather to the power line voltage. If, say, you need MORE blinky, you can chain these together. For the second Wing, connect the DIN connection to the first Wing's DOUT. Also connect a ground pin together and power with an independant 5V supply to keep from loading the power supply too much.
- 50.8mm x 22.9mm x 2.7mm / 2" x 0.9" x 0.1"
- Weight: 5.2g
Specifiche
Part. No. : | 2945 |
Questions on NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
808524 Adafruit Feather 32u4 Bluefruit LE
This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with builfalse -
808529 FeatherWing Proto - Prototyping Add-on For All Feather Boards
This is the FeatherWing Proto - a prototyping add-on for all Feather boards. -
808553 Adafruit Feather 32u4 Adalogger
This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and bfalse -
808554 Feather Stacking Headers - 12-pin and 16-pin female headers
These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! -
808581 8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
This is the 8-Channel PWM or Servo FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing. -
809084 Adafruit DotStar FeatherWing - 6 x 12 RGB LEDs
This is the DotStar FeatherWing, a 6x12 RGB LED Add-on For All Feather Boards!