Dettagli
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.
Documents:
- Schematic
- Eagle Files
- Datasheet (LMV358)
- GitHub (Design Files)
Specifiche
Part. No. : | BOB-09816\ |
Questions on OpAmp Breakout LMV358
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
808006 Op Amp - Dual Rail-to-Rail - 2.7-6V power @ 80mA output
Amplificatore operazionale molto versatile, elevata potenza di uscita, ampio range di alimentazione, caratteristiche generalifalse -
714874 SparkFun Configurable OpAmp Board - TSH82
Scheda con un amplificatore operazionale TSH82. Il chip e' accessibile direttamente dai pin esterni. Tramite i jumper e' possfalse