Dettagli
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable’s wires have been color coded to Red, Black, Blue, and Yellow.
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields, and cables that make prototyping faster and less prone to error. All Qwiic enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
- Dimensions: 100mm (3.93") Length
Specifiche
| Part. No. : | PRT-14427 |
| Interfaccia : | I/O |
| Tensione : | 3.3 |
| Tipo Shield : | Utilita' |
Questions on Qwiic Cable - 100mm
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
714352 SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System witfalse -
714414 SparkFun GPS Breakout - XA1110 (Qwiic)
Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized Sparkfalse -
714351 SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)
The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it eafalse -
714347 SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic)
The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easifalse -
714425 Qwiic Cable - Breadboard Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookupfalse -
714429 Qwiic Cable - 500mm
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse -
714428 Qwiic Cable - 200mm
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bfalse -
714426 Qwiic Cable - 50mm
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse -
714417 Qwiic JST Connector - SMD 4-pin
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to creafalse
|
Arduino UNO R3 con microcontrollore ATmega328 
Tasse escluse:
€ 17,30
IVA inclusa:
€ 21,11
|
Tasse escluse:
€ 72,11
IVA inclusa:
€ 87,97
|
-
715098 SparkFun BlackBoard C
Tasse escluse:€ 20,90IVA inclusa:€ 25,50 -
714677 SparkFun Infrared Control Kit
Tasse escluse:€ 9,80IVA inclusa:€ 11,96 -
715092 Sparkfun - USB 2.0 Cable A to C ...
Tasse escluse:€ 3,40IVA inclusa:€ 4,15 -
715031 SparkFun WiFi IR Blaster (ESP8266)
Tasse escluse:€ 21,00IVA inclusa:€ 25,62 -
715123 SparkFun RedBoard Qwiic
Tasse escluse:€ 18,20IVA inclusa:€ 22,20
Non ci sono prodotti da comparare
-
-
3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors
Tasse escluse:€ 1,02IVA inclusa:€ 1,24Non disponibile
-
-
Cavo + Connettore da PCB tipo JST - 2 poli
Tasse escluse:€ 0,93IVA inclusa:€ 1,13Non disponibile
-
Cavetto Jumper Femmina - passo 2.54mm - 2pin
Tasse escluse:€ 0,93IVA inclusa:€ 1,13Non disponibile
-
-
-
SparkFun 16 Output I/O Expander Breakout - SX1509
Tasse escluse:€ 5,90IVA inclusa:€ 7,20Non disponibile
