807132 RN41 - Class 1 Bluetooth SMD Module Chip Antenna

RN41 - Class 1 Bluetooth SMD Module Chip Antenna

The RN41 is perfect for battery powered applications and by default is ready to use in the SPP (Serial Port Profile) configuration. It uses only 250 µA in sleep mode while still being discoverable and connectable.(RN41-I/RM)
Categorie
Prezzi IVA inclusa
€ 22,57 Prezzo
€ 18,50 + VAT

 

Dettagli

The RN41 is a small form factor, low power, simple to integrate Bluetooth radio for OEMs adding wireless capability to their products.

The RN41 is perfect for battery powered applications and by default is ready to use in the SPP (Serial Port Profile) configuration.  It uses only 250 µA in sleep mode while still being discoverable and connectable.  Multiple low power modes available allow you to dial in the lowest power profile for your application.

The RN41 supports multiple Bluetooth profiles, is fully certified, and is simple to design in, making it a complete embedded Bluetooth solution.

With its high performance on-chip antenna and support for Bluetooth Enhanced Data Rate (EDR), the RN41 delivers up to 3 Mbps data rate for distances to 100 meters.  The RN41 is the perfect product for engineers adding Bluetooth capability to their product without spending significant time and money to develop Bluetooth specific hardware and software.

The RN41 can be configured in different modes:

HCI Mode:  In this mode the Bluetooth stack is running on an external processor (not on RN41)

There are two possible hardware interface options:

  • UART: This is called HCI over H4.  The external processor running the stack is interfaced to the RN41 using the UART interface.  The baud rate at which the RN41 talks to the processor is fixed and needs to be programmed (in the RN41) during the firmware flash process.  Customers need to specify this while ordering. 
  • USB: In this mode, the RN41 is interfaced to the external processor using a USB interface.  The RN41 acts as a USB slave (not a USB host).

The key advantage of HCI mode is that it allows customers to run custom profiles on their processor.  It also provides fast data rates (up to 3 Mbps).

HID mode:  Roving now offers HID device profile support for the RN41/42.  It allows customers to create HID devices such as keyboards, mouse, pointing devices, etc.

Click here for the latest firmware

FEATURES

  • Fully certified Class 1 Bluetooth 2.1 + EDR module
  • Bluetooth SIG qualified
  • UART (SPP or HCI) and USB (HCI only) data connection hardware interfaces
  • Onboard embedded Bluetooth stack (no host processor required)
  • Supports Bluetooth data link to iPhone/iPad/iPod Touch
  • Supports HID profile for making accessories such as keyboards, mouse, pointing devices
  • Programmable low power modes
  • Secure communications, 128 bit encryption
  • Error correction for guaranteed packet delivery
  • UART local and over-the-air RF configuration
  • Auto-discovery/pairing requires no software configuration (instant cable replacement)
  • Castellated SMT pads for easy and reliable PCB mounting

APPLICATIONS

  • Cable replacement
  • Barcode scanners
  • Measurement/Monitoring
  • Medical devices
  • Industrial sensors & controls
  • Asset tracking

SPECIFICATIONS

Bluetooth Versions

2.1 + EDR, 2.0, 1.2, 1.1

Data rate

With onboard stack: 300Kbps: HCI mode: 1.5Mbps sustained, 3Mbps burst

Frequency Band

2.412 - 2.484 GHz

Modulation Techniques

FHSS/GFSK modulation, 79 channels at 1MHz intervals

Profiles

SPP, DUN, HID, iAP, HCI, RFCOM, L2CAP, SDP

Supply voltage

3.3V ± 10%

Output power

+15dBm

Power consumption

Standby/Idle 25 mA : Connected (normal mode) 30 mA : Connected (low power Sniff) 8 mA : Standby/Idle (Deep sleep enabled) 250µA

Operating temperature range

-40C to +85C

Interface

UART, USB, Bluetooth

Antenna

Chip

Size

0.52" x 1" x 0.07" (13.4mm x 25.8mm x 2mm)

Weight

0.055 oz

Certifications

FCC, IC, CE, Bluetooth SIG

RESOURCES

Specifiche

Part. No. : RN41-I/RM

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on RN41 - Class 1 Bluetooth SMD Module Chip Antenna

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. RN-41-EK - Roving Networks RN41 Bluetooth Evaluation Kit

    807136 RN-41-EK - Roving Networks RN41 Bluetooth Evaluation Kit

    The RN-41-EK is an evaluation kit for the RN41 module. The board has the flexibility to connect directly to a PC via a standfalse
    Tasse escluse:
    € 33,60
    IVA inclusa:
    € 40,99
      Confronta
  2. SparkFun Bluetooth Module Breakout - Roving Networks (RN-41 v6.15)

    712579 SparkFun Bluetooth Module Breakout - Roving Networks (RN-41 v6.15)

    Breakout Board con modulo Roving Network RN-41. Questo modulo è molto piccolo, potente e facile da usare: è stato studiato pefalse
    Tasse escluse:
    € 34,69
    IVA inclusa:
    € 42,32
      Confronta