120231 NFC Module for Arduino

NFC Module for Arduino

NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.
Categorie
Prezzi IVA inclusa
€ 17,95 Prezzo
€ 14,71 + VAT

 

Dettagli

Your credit cards: gone. Bus pass and train tickets: vanished.Welcome to Near Field Communications (NFC) Module for arduino, a contactless, Wi-Fi-lite style tech that could already be in your smartphone, and could soon be a regular feature of your commute.
Near Field Communications(NFC) is a set of short-range wireless technologies, typically requiring a distance of 10cm or less, for two devices such as smartphones or the similar things very close to each other to establish communication. Communication is also possible between a NFC device and unpowered NFC chips such as tags, stickers, key fobs and cards which do not require batteries.
The NFC Module for Arduino is designed to extend this powerful feature for your project or application based on Arduino.It integrates a PN532 NFC controller from Philips.The driver interface for this product is UART interface of the microcontroller. So it's possible for you to test it via a USB to UART converter directly. On the other hand, for the applications with microcontroller, the module provides an event for your processor when detects the NFC tags, stickers, key fobs, or cards via high speed serial uart.

 

 

APPLICATIONS

 

 

  • Contactless payment systems
  • Bluetooth and Wi-Fi connections
  • Social networking situations, such as sharing contacts, photos, videos or files
  • Electronic identity documents and keycards
  • Smartphone automation and NFC tags
Help us to improve the library!
We have this fantastic NFC module for arduino, and find that none of the existing library is good enough for this module. If you're an Arduino developer or geeker, and just happen to know something about NFC, please help us to make our Arduino NFC module better. We'd like to have it support ting the NDEF protocol. 
 

 

SPECIFICATION

 

 

  • Working Voltage: 3.3v or 5v
  • Host interface: UART
  • Default Band rate: 115200 bps
  • Integrate PN532 NFC controller
  • Supports ISO 14443A/MIFARE
  • Supports ISO 14443B in reader/writer mode only
  • Typical max operating distance for detecting NFC tags from 20 to 50mm depending on the antenna size of the tag
  • Serve for contactless communication at 13.56MHz
  • Size: 11cm x 5cm(4.33"x1.97")

 

 

DOCUMENTS

 

 

 

 

SHIPPING LIST

 

 

  • NFC Module for Arduino 1unit
  • NFC Sticker (Round)  (FIT0315)    x1

Specifiche

Part. No. : DFR0231

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on NFC Module for Arduino

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. PN532 NFC/RFID controller breakout board - v1.3

    501364 PN532 NFC/RFID controller breakout board - v1.3

    Il PN532 e' il piu' diffuso chip NFC, e' quello che si trova nella maggior parte dei telefoni o dispositivi che utilizzano l'NFC.
    Tasse escluse:
    € 42,40
    IVA inclusa:
    € 51,73
      Confronta
  2. Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

    501789 Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

    Il PN532 e' il piu' diffuso chip NFC, e' quello che si trova nella maggior parte dei telefoni o dispositivi che utilizzano l'false
    Tasse escluse:
    € 42,40
    IVA inclusa:
    € 51,73
      Confronta
  3. NFC Shield V2.0

    115069 NFC Shield V2.0

    Shield NFC (Near Field Communication), con transceiver PN532 che gestisce le comunicazioni a 13.56MHz
    Tasse escluse:
    € 28,21
    IVA inclusa:
    € 34,42
    A partire da:
    € 21,90
      Confronta
  4. MOD-RFID1356MIFARE - NFC RFID READER WRITER FOR 13.56MHZ NFC MIFARE RFID TAGS

    510037 MOD-RFID1356MIFARE - NFC RFID READER WRITER FOR 13.56MHZ NFC MIFARE RFID TAGS

    MOD-RFID1356MIFARE can read and write NFC / Mifare RFID tags operating at 13.56Mhz. MOD-RFID1356MIFARE uses NXP PN532 to readfalse
    Tasse escluse:
    € 19,90
    IVA inclusa:
    € 24,28
      Confronta
  5. NFC Tag (Round)

    120314 NFC Tag (Round)

    NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and efalse
    Tasse escluse:
    € 1,68
    IVA inclusa:
    € 2,05
      Confronta